Available again soon

AEA HPMAX MK2

Product details:Caliber: .35 (9mm) - DiaboloMagazine capacity: 8 roundsShot energy: Max. 7.5 joules (F version)Weight: Approx. 3 kgSystem: Straight pull repeaterMaximum filling pressure: 300 barMounting rail for target optics: 11mmCartridge can be changed under pressureTank with gaugeThis adapter is required to attach a moderator:ADAPTERSpecial features:Abroad (please observe local laws) or after conversion and registration by a gunsmith up to 230 joules or semi-automatic.Card system, conversion without pressure loss (secured by safety screw/sticker on delivery, hand screw included)Optional: cartridge can be changed under pressure without regulatorSemi-automatic with regulator 60-130 joulesFor full power (up to 230 joules) use of cartridge without regulator possible. In this case, the semi-auto kit must be removed and the repeater system converted. The function is then the same as with HPMax 1Scope of delivery:HPMax MK22 magazinesFilling adapterexport kitScope and mount not included in the scope of delivery. Cocking lever is removed for shipping and must be installed before first use.If this product is available, the delivery time stated above applies (usually: 3 - 5 working days).

€999.00*

Details

Available again soon

AEA Megalodon F-Series

The AEA Megalodon is the successor to the widely popular Challenger. It features an 8-shot magazine (rubber balls in .50 caliber) and reloads via a “pump action” mechanism. The F-Version is limited to 7.5 joules of power.The reliable pump action system allows for 8 shots to be fired in under 6 seconds. Another unique feature of the Megalodon is its two air cartridges. The rear cartridge (part of the stock) can be changed under pressure, while the front cartridge serves as a “plenum,” ensuring very consistent shot output.Scope of delivery:two magazinesa fill adapter for standard PCP pumps and compressors (minimum filling pressure of 250 bar)22mm Picatinny rail for mounting compatible scopes or red dot sightsExport kit, consisting of:a "card" with a 12mm hole instead of the standard 0.9mm holea tube insert, which can replace the regulator in the rear cartridgePossession of the export kit is legal in Germany; however, installation requires a permit. With this permitted modification, the weapon can achieve muzzle energy up to 600 joules with .50 caliber lead projectiles. Alternatively, the regulator can remain in use, reducing maximum projectile energy (between 100 and 500 joules depending on chosen regulator pressure) while increasing the number of shots per air fill and keeping energy output constant (as long as there is sufficient pressure in the system). The installation of the export kit is explained via a video, the link is provided with the weapon (QR code).Product details:Caliber: .50 - RubberballMagazine capacity: 8 shotsProjectile energy: Max. 7.5 joules (F-Version)Weight: 4 kgLength: 97 cmSystem: Pump ActionMaximum fill pressure: 300 barMounting rail for optics: 22mmCartridges: 2, rear cartridge changeable under pressureSpecial features: Abroad (please observe local laws) or after modification and registration by a gunsmith, up to 600 joules.Card system: modification without pressure loss (secured in F-Version with tear-off screw)Scope of delivery:AEA Megalodon F-Series2 magazinesFill adapterExport kitGerman manualSilencerNo optics includedIf this product is available, the delivery time stated above applies (usually: 3 - 5 working days).

€1,499.00*

Details

Available

AIRGHANDI's Recommendation

Delivery time: 3 - 5 workdays

Anschütz Optics CLASSIC 2-7x32

Anschütz Optics CLASSIC 2-7x32 (62600) – Classic. Durable. Precise. AirGhandi says: "The Anschütz Optics CLASSIC 2-7x32 is the ideal entry-level rifle scope for short to medium ranges. It is sharp from as little as 4.7 m and super compact. It is recoil-resistant, offers a clear image, and has a simple, fine reticle. For me, it is a real insider tip in the budget range that immediately enhances any low-cost air rifle. The Anschütz Optics CLASSIC 2-7x32 (62600) is a straightforward, functional riflescope designed for hunters and sport shooters who value simplicity, reliability, and precision on short to mid-range shots. With a 2–7x magnification range, 32 mm objective lens, and a trusted MIL Dot reticle, this scope delivers clear target acquisition under a variety of lighting conditions. A field of view of 15.5 – 4.7 m at 100 m ensures situational awareness in dense terrain. Built with a rugged 25.4 mm (1") tube, this scope is IP-67 rated – dustproof and waterproof – and features a fully multi-coated (FMC) lens system for crisp, high-contrast visuals. A resistant zoom ring ensures reliable magnification adjustment even under adverse conditions. The capped turrets protect against unintentional adjustments, while the 1/10 MRAD click value and 8.7 MRAD adjustment range enable precise tuning. The lens-side parallax correction is adjustable from 4.6 m to infinity and offers maximum flexibility in use. In addition, the integrated quick-focus eyepiece enables fast and precise focusing of the reticle – ideal for changing situations. Key Specifications: Magnification: 2 – 7x Objective lens diameter: 32 mm Field of view (100 m): 15.5 – 4.7 m Eye relief: 76 mm Exit pupil distance: 11 – 4.6 mm Diopter adjustment: -3 to +2 Parallax: 4.6 m – ∞ Reticle: MIL Dot (non-illuminated) Turrets: Capped turrets Click value: 1/10 MRAD Adjustment range: 8.7 MRAD Coating: FMC (Fully Multi-Coated) Protection class: IP-67 – dust & waterproof Tube diameter: 25.4 mm / 1" Weight: 420 g Dimensions (see image) in mm: A: 292, B: 114, C: 32, D: 47, E: 95, F: 83, G: 47, H: 40, I: 25.4, J: 35 Whether for stalking, stand hunting, or range shooting – the CLASSIC 2-7x32 offers trusted performance in a compact, dependable format.

€139.00*

Available

Delivery time: 3 - 5 workdays

Anschütz Optics Reflex Pro small (24x17)

Anschütz Optics Reflex Pro Small (61110) – Compact. Precise. Robust.The Anschütz Optics Reflex Pro Small (61110) is an ultra-compact reflex sight built for fast, precise targeting. With a durable aluminum housing and weighing only 42 g, it features a 24x17 mm lens, unlimited eye relief, and 1 MOA adjustment steps.Choose from three reticle types (dot, circle, and circle with dot) with a precise 2 MOA dot and a 35 MOA circle. Seven brightness levels ensure visibility in all light conditions. The Shake Awake feature automatically powers the sight on with motion. A 100 MOA windage and elevation adjustment gives you full control. Fully waterproof (IP67) and compatible with Weaver rails, this sight is built for reliability in any environment.Key Features:For Picatinny/Weaver railsMagnification: 1.0xClick value: 1 MOA3 selectable reticles: dot, circle, circle with dotDot size: 2 MOA; Circle: 35 MOAWindage and elevation adjustment: 100 MOALense: 24x17 mmUnlimited eye relief7 brightness settingsShake awake power-onBattery type: CR1632Waterproof rating: IP67Housing material: AluminumDimensions: 46 x 30.5 x 39 mmWeight: 42 gPerfect for sport shooters, hunters, or tactical users – the Anschütz Optics Reflex Pro Small delivers accuracy and reliability in a compact package.

€199.00*

Available

Delivery time: 3 - 5 workdays

Anschütz Optics variable ring mount, 1", adjustable, dovetail, screwed, two piece - 63603

Anschütz Optics variable ring mount, 1", adjustable, dovetail, screwed, two piece - 63603Maximum precision and flexibility: The Anschütz Optics Variable Ring Mount 1" (63603) with screw fixation is the perfect choice for shooters needing an adjustable-height mounting solution for a 9–11 mm dovetail rail. Manufactured from strong 6061-T6 aluminum, this two-piece mount provides a precisely flat surface for consistent performance.The adjustable height design allows individual customization of scope height – ideal for different optics, shooting stances, or ergonomic requirements. he mount is secured using strong double hex screws (M4x10), and an integrated protection strip prevents damage while enhancing grip.Technical specifications:Tube diameter: 1" (25.4 mm)Mount type: AdjustableRail compatibility: 9–11 mm dovetailFixation: Double Hex (screwed)Two pieceMax. torque: ring: 2.0 Nm / rail: 3.4 NmMaterial: 6061-T6 AluminiumHeight: AdjustableOverall height: 53.45 mmWidth: 43.14 mm

€49.00*

Available

Delivery time: 3 - 5 workdays

Anschütz Optics variable ring mount, 1", adjustable, Weaver/Picatinny, QR, two piece - 63616

Anschütz Optics variable ring mount, 1", adjustable, Weaver/Picatinny, QR, two piece - 63616Maximum precision and flexibility: The Anschütz Optics Variable Ring Mount 1" (63616) with quick-release function is the ideal choice for hunters and sport shooters who require adjustable mounting height. Made from high-grade 6061-T6 aluminum, this two-piece mount offers a perfectly flat surface for repeatable performance in the most demanding conditions.Designed for Weaver and Picatinny rails, this mount features a height-adjustable design that allows for flexible scope positioning – ideal for different optics, shooting positions, or ergonomic preferences. Quick-release levers enable fast and tool-free mounting and removal. An integrated protection strip prevents scope damage and ensures a secure grip.Technical specifications:Tube diameter: 1" (25.4 mm)Mount type: AdjustableRail compatibility: Weaver/PicatinnyFixation: Lever (Quick Release)Two pieceMax. torque: ring: 2.0 NmMaterial: 6061-T6 AluminiumHeight: AdjustableOverall height: 50.89 mmWidth: 43.14 mm

€49.00*

Available

Für die deutsche AEA HPMax MK2

Delivery time: 3 - 5 workdays

DonnyFL AEA HP MAX Adapter .357/.45/.50 AEA Challenger / .357

DonnyFL Adapter .357/.45/.50 AEA Challenger / .357 AEA HP MAX (A91)Compatible with .357/.45/.50 AEA Challenger and .357/.45/.50 AEA HPMaxOuter Thread: M18x1Material: AluminumCaliber: .357 / .45 / .50

€49.00*

Available

Delivery time: 3 - 5 workdays

DonnyFL Emperor V3 / .308 .357 M18x1 - Schalldämpfer

DonnyFL Emperor V3 / .308 .357 M18x1The DonnyFL Emperor V3 is made for high power airguns.This version has a Monocore-Design and gives you the option to attach an optional 6,5-Inch-Extender to lower the volume even more. To attach the extender, please remove the cap of the Emperor. caliber: .308 / .357The adapter is not includedEndcaps for M18x1Suitable for the AEA HPMax MK1 and MK2 with the appropriate adapter

€329.00*

Available

Delivery time: 3 - 5 workdays

DonnyFL Emperor V3 / .45 .50 M18x1

DonnyFL Emperor V3 / .45 .50 M18x1Fits for AEA Challenger and AEA Megalodon!This Emperor is for the serious high powered airgunner. This version has a mono-core design and allows you to screw on an optional 6.5 inch extender to make it even quieter. Features:caliber .457 and .50the adapter is not includedEndcap for M18x1 (big bore)Comes pre-wrapped in felt and stainless steel mesh Machined grooves on the outside for easy handlingMade with 6061 AluminumWill not work for firearmsWeighs around 16 ouncesComes with protective red tube for easy transport and storage. To attach the extender (available separately), please remove the cap of the Emperor.

€329.00*

Available

Delivery time: 3 - 5 workdays

DonnyFL GREAT KAMI .72 Silencer 2x14.25

DonnyFL GREAT KAMI .72 Silencer 2x14.25When we released the Emperor, we never thought there would be a demand for something longer. But now with the AEA Zeus on the market, the Great Kami is born. The baffles are thicker than the Emperor's to withstand the constant powerful air blast, yet it only weighs 2 more ounces than the Emperor. Features:6061 T6 AluminumBlack anodizedWeighs 1.2 lbs.72 cal is threaded M23x1 specific for the AEA Zeus.45/50 is threaded M18x1

€319.00*

Available

Delivery time: 3 - 5 workdays

DonnyFL Huben GK1 Moderator-Adapter

DonnyFL Huben GK1 Moderator-Adapter This adapter allows you to add a 1/2 x 20 moderator or muzzle brake to your fun little pistol.Features:6061 T6 AluminumBlack AnodizeKnurled thread protector

€49.00*

Available

Delivery time: 3 - 5 workdays

DonnyFL Huben K1 1/2 x 20 Adapter A9

DonnyFL Huben K1 1/2 x 20 Adapter A9With the DonnyFL Adapter you can attach a silencer to your Huben K1. (Not compatible with the 1st generation of Huben K1)

€49.00*

Available again soon

DonnyFL Sumo

DonnyFL Sumo .177/.22 - 1/2"x20 - silencercompatible caliber: .177 / .22Mono-Core-Design for higher precisionno moving partssandblasted and anodizedDiameter: 1.6"/4.064 cm

€179.00*

Details

Available

Delivery time: 3 - 5 workdays

DonnyFL Sumo 1/2" UNF cal. 7.62mm

DonnyFL Sumo cal. 7.62mm - 1/2"x20 - silencercompatible caliber: 7.62mmMono-Core-Design for higher precisionno moving partssandblasted and anodizedsuitable for FX Dreamline cal. 7.62mm

€179.00*

Available

Harmonic Tuning

Delivery time: 3 - 5 workdays

DonnyFL YOKOZUNA QD Silencer 6,35mm /.25 - 1/2x20

Introducing DonnyFL’s new Quick Disconnect moderators. These precision-engineered moderators feature a quick detach system, ensuring consistent shooting performance with no point-of-impact changes after detaching and re-attaching. These moderators are caliber specific compared to previous versions. Crafted from high-grade aluminum, they’re robust and modular to adapt to your shooting needs. DonnyFL also offers replacement rear caps for current moderators to transform them into QD.FEATURES:Indexed locking system for consistent position and no point of impact changes.Quick detachment for easy storage and reattachment for shooting.Comes with a 1/2 x 20 female (barrel/shroud) thread adapter.Modular design for length adjustment.Crafted from 6061 T6 aluminum (individual sections) and 7075 aluminum (main QD housing and adapter).YOKOZUNA: The Yokozuna or sumo grand champion, has the same outer diameter as our Sumo 40.46mm or 1.6 inches.

€249.00*

Available

Delivery time: 3 - 5 workdays

EVANIX Viper Cal. 30

Evanix Viper, 7.5J version – now available in .30 caliber Cutting-edge airgun technology, combined with high precision and an elegant design, makes the Evanix Viper a semi-automatic PCP air pistol that sets new standards in performance and craftsmanship. This pistol is not only a powerful force of engineering but also a true highlight for demanding sport shooters and tech enthusiasts. Precision meets comfort Thanks to its innovative slide mechanism, cocking the Viper is effortless – fast, smooth, and efficient. The ergonomically shaped grip and sensitive trigger ensure intuitive and secure handling, even during extended use. The high-quality checkered wooden grip panels not only provide a premium appearance but also deliver excellent grip. In combination with the matte black aluminum frame, the result is a sophisticated look with a sporty character – perfectly formed and fully functional. Fully equipped Whether scope or red dot – the integrated Weaver/Picatinny rail offers full flexibility for mounting your preferred optics. The factory-installed open sights can be easily removed if needed. The side-mounted safety switch is conveniently thumb-operated – giving you maximum control with every shot. Double the power with dual air tanks A true highlight of the Evanix Viper: two separate air reservoirs provide impressive endurance and high shooting performance. The primary reservoir is located beneath the barrel, while the second surrounds the barrel itself – cleverly distributed for optimal balance. Both tanks can be filled via the fill port on the underside of the pistol with up to 250 bar of pressure, ensuring long operating times and consistently strong performance. Technical specifications: Caliber: .30 – 7.62 mm Action: Semi-automatic Length: 282 mm Barrel length: 160 mm Fill pressure: 250 bar Weight: 1.2 kg Magazine: 5 rounds (two magazines included) When the product is available, the delivery time stated above applies (usually: 3 - 5 business days).

€1,349.00*

Available

Delivery time: 3 - 5 workdays

Huben K1

Huben K1True semi-automatic thanks to hammerless design - frequency up to 6 shots per second19-round magazine, .22 caliberIntegrated silencerSpare parts kit included Can be filled with up to 350 barBullpup design for compact size with long barrelThe design is completely hammerless, eliminating the need for manual cocking before each shot. The gun fires every time the trigger is pulled (weight 1.6 kg) until either the 19-round magazine is empty or there is no more pressure in the cartridge. It is easily possible to fire the 19 shots within 3 seconds - it feels like a fully automatic system!Thanks to the integrated silencer, the gun is whisper-quiet. The "tank" can be filled with up to 350 bar pressure, which makes for an impressive amount of shots. In the 7.5 joule version, this amount of air is sufficient for several hundred shots. After conversion by a gunsmith, the gun can deliver up to 100 joules. (Attention: In Germany only with official permission) A full tank is then sufficient for approx. 38 shots.If this product is available, the delivery time stated above applies (usually: 3 - 5 working days).

€1,699.00*

Available

Delivery time: 3 - 5 workdays

Huben Pistol GK1 V3

Huben Pistol GK1 V3Details:True semi-automatic due to hammerless designCaliber .22″ (5.5mm) diaboloVelocity 110-120 m/s (max. 7.5 joules)Number of shots per filling approx. 40 shotsMagazine type: Non-removable, automatically rotating when firedMagazine capacity 19 roundsGrip: WalnutWorking pressure: from 300 bar to 100 barOptics mount: 11mm railCylinder capacity: 85ccWeight: approx. 1.2kg (2.65 lb)Barrel: 210mm (8.26)Dimensions 325x160x50mm (12.79x6.30x1.97 inch)With built-in export kit (installation only with permission):Velocity - 230m/s, 30-40 joulesNumber of rounds approx. 19/chargeThis adapter is required to attach a moderator:ADAPTERScope of delivery:1x Huben Gk11x lockable case1x export parts (possession in Germany without permission, installation only with permission) + spare parts1x filling adapter1x user manualIf this product is available, the delivery time stated above applies (usually: 3 - 5 working days).

€1,699.00*

Available

Delivery time: 3 - 5 workdays

JSB Exact Diabolo .30 / 7.62mm / 2,9g / 150pcs

JSB Exact .30 - 7.62mm - 2,9g - 150pcsThe first serial cal .30 pellets available on the market. Developed in cooperation with top hunting airguns manufacturers. JSB Exact .30 was carefully designed, precisely produced and quality controlled by JSB´s experienced workers so it is very accurate. The weight of 2,9 grams was chosen due to perfect balance of pellet.

€17.99*

Available

Delivery time: 3 - 5 workdays

JSB Exact Diabolo .35 / 9mm / 5.2g / 100pcs

JSB Exact Diabolo .35 / 9mm / 5.2g / 100pcsThe biggest caliber airgun pellet in the world. This is the cal .35 JSB exact! It meets your demand on accurate and powerful ammunition for your airgun hunting (in the countries where it is allowed). The weight of 5,2 grams was chosen to meet the requirements of high impact energy with reasonable flat trajectory. Top precision and accuracy by JSB.

€15.99*

Available

Delivery time: 3 - 5 workdays

JSB Exact Jumbo Diabolo 5,52mm / 500Stk / 1,030g

Due to its weights, a specially designed shape, perfect distribution of the centre of gravity and alignment the JSB EXACT JUMBO products are the best choice for longer-distance shooting. Exact products, just as all the other products, undergo a thorough hand-picked quality control. We guarantee the quality of the products, the rest of successful shooting is entirely up to you ... Ammunition tested by 45 meters shooting. The required result after five shots is a group where centre to centre of the shots is up to 16mm.

€19.90*

Available

Delivery time: 3 - 5 workdays

Moderator adapter EVANIX Viper cal. 30 - 1/2"x20 UNF

This precision-manufactured, black anodized thread adapter lets you easily attach moderators or other accessories with a 1/2"x20 UNF thread to your EVANIX Viper and Evanix MaxAir 2 in .30 caliber.When you’re not using a moderator, the included plastic thread protector keeps the threads safe from dirt and damage.Specifications:Outer diameter: 30 mm, knurled for better gripTotal length: approx. 34 mmMaterial: aluminum, black anodizedThreads: female 5/8"x18, male 1/2"x20 UNFFits EVANIX Viper and Evanix MaxAir 2 in caliber 7.62mm / .30

€49.00*

Available

Delivery time: 3 - 5 workdays

UTG-1 adapter 11mm to Picatinny/Weaver

UTG-1 Adapter 11mm to Picatinny/WeaverFor mounting red dot sights or single ring mounts on air rifles and small-caliber rifles.Adapter 11mm to Picatinny/WeaverSpring tension in the upper slot for secure mountingFlat heightPrecise, repeatable positioningEasy to installRebovable stop pin for secure installationSet of 2Material: aluminumLength: 25.4 mmWidth: 23.6 mmHeight: 6.1 mmWeight: 5.1 g

€31.00*

Available

Delivery time: 3 - 5 workdays

ZAN Slugs 81 grain / .357HP (100pcs)

ZAN Slugs 81 grain / .357HP (100pcs)81 grain swaged pellets (slug)The new range of .357 ZAN slugs, accurate and high expanding slugs for hunting or target shooting, Hollow point gives high stopping power even at lower velocities. Base of the slug is designed for the perfect seal of the barrel. Come in box packed each individualy so they canot damage when shipping.In box 100pcs.Diameter: .357" or 9mmLenght: 10.5mm

€17.90* €24.99* (28.37% saved)
previously €24.99*

Home Defence & Zubehör bei jabolo.de

In der Kategorie Home Defence & Zubehör findest Du ausgewähltes Equipment rund um Armbrüste, Luftdruckwaffen und RAM-Waffen – mit Schwerpunkt auf hochwertigem Zubehör wie Zielfernrohre, Montagen, Reflexvisiere und weiteres Anbauequipment.

Unser Fokus liegt darauf, Deine vorhandene Ausrüstung sinnvoll zu ergänzen und aufzuwerten. Mit passgenauen Optiken, stabilen Montagen und durchdachten Zubehörlösungen holst Du mehr Präzision, Komfort und Kontrolle aus Deinen bestehenden Modellen heraus – ganz egal, ob Du im Schießsport aktiv bist, realistische Trainingsszenarien übst oder einfach Freude an moderner Technik hast.

Alle angebotenen Produkte sind für den legalen, verantwortungsvollen Gebrauch in Deutschland vorgesehen. Wir geben keine Handlungsanleitungen zur Selbstverteidigung, sondern unterstützen Dich beim sicheren, sportlichen und technischen Einsatz Deiner Ausrüstung. So bekommst Du bei jabolo.de genau das Zubehör, das zu Deinen Ansprüchen passt.