UTG OP3 Micro SL, Red 4.0 MOA Single Dot, Side LoadingJust like optics on long guns being common place, pistol mounted optics, are on their way to becoming one in the same. With the benefits being obvious and handguns being the primary option for on-the-go and on-your-person defense, UTG® OP3 Micro reflex dot sights are your next choice in reliable and affordable pistol mounted optics with different models tailored to the unique needs of various shooters.OP3 Micro SL: Battery Life in YearsSide Loading BatteryIPX7 WaterproofRed 4.0 MOA Single DotDocter® FootprintDetails: Precision Machined from 6061-T6 Aluminum and Finished in a Matte Black AnodizationRed 4.0 MOA Single Dot with 8 Brightness Intensity SettingsSide Loading Battery Compartment, No Longer Necessary to Remove Sight and Re-zero when Replacing Battery15,000+ Hours Battery Life at Middle Brightness SettingCrisp 1 MOA per Click AdjustmentLarge FOV Multi-coated Glass LensIPX7 Waterproof RatedIncludes Removable Low Profile Picatinny Mounting BaseMounting Base Interface Uses the Common Docter FootprintOptic Height Co-witnesses with Most Suppressor Height Iron SightsTertiary Aiming Point Laser Engraved on Rear Face of Optic HoodProtective Optic Cover IncludedCompatible with Most Optics Ready Pistol Systems and All UTG® RDM20 MountsCAUTION: Only use the included #6-48 screws for optic installation.NOTE: We recommend to tighten the #6-48 screw with torque value of about 12 inch-lb and the side plate screw with torque value of about 35 inch-lb.SINGLE DOT RETICLETarget Dot reticle consists of a single floating dot in the center as the aiming point with the least visual distraction. It is commonly used for quick aiming applications with lower demand for pin-point accuracy. The shooter aims by pointing the dot at the target. For a reflex dot sight based on light reflection, the sight usually does not have magnification and there is an unlimited eye relief. The dot is a reflected image of the light source with common characteristics from any light reflection, including possibly slight flare and fuzziness of the dot.Specifications:   Battery Life15000 Battery LoadingSide Loading Battery TypeCR1632 3V Brightness Mode(s)Manual Click Value1 MOA Eye ReliefInfinity Illumination Toggle TypeButton Lens MaterialGlass Magnification1X Materials6061-T6 Aluminum Optic FootprintFor DOCTER® ReticleSingle Dot Reticle ColorRed Surface FinishAnodized WarrantyLifetime Waterproof RatingIPX7 Weight1.2 oz (51 g) Dimensions:  Height1.02 in (17 mm) Length1.81 in (46 mm) Width1.34 in (34 mm) Window Size0.89 in x 0.68 in (23 mm x 17 mm) Parts included: CR1632 3V High Energy Lithium BatteryM3x0.5 T10 Torx Screw, 7mm,  2x#6-48 T10 Torx Screw, 7mm, 2xT10 Torx WrenchAllen Wrench 3mmW/E Adjusting WrenchProtective Optic CoverCleaning ClothDot Sight Owners Manual

Introducing DonnyFL’s new Quick Disconnect moderators. These precision-engineered moderators feature a quick detach system, ensuring consistent shooting performance with no point-of-impact changes after detaching and re-attaching. These moderators are caliber specific compared to previous versions. Crafted from high-grade aluminum, they’re robust and modular to adapt to your shooting needs. DonnyFL also offers replacement rear caps for current moderators to transform them into QD.FEATURES:Indexed locking system for consistent position and no point of impact changes.Quick detachment for easy storage and reattachment for shooting.Comes with a 1/2 x 20 female (barrel/shroud) thread adapter.Modular design for length adjustment.Crafted from 6061 T6 aluminum (individual sections) and 7075 aluminum (main QD housing and adapter).RYU: In Japanese mythology, the koi carp are symbolic of samurai warriors. As they brave the upstream battle to the top of the waterfall. The ones that make it to the top are awarded for their bravery, strength and perseverance. The gods rewarded them by transforming them into strong dragons. RYU is Japanese for dragon and DonnyFL feels that this is their koi going through its transformation into something that is more robust. The RYU has the same diameter as the KOI at 30.48mm or 1.2 inches.

DonnyFL Huben GK1 Moderator-Adapter This adapter allows you to add a 1/2 x 20 moderator or muzzle brake to your fun little pistol.Features:6061 T6 AluminumBlack AnodizeKnurled thread protector

Due to its weights, a specially designed shape, perfect distribution of the centre of gravity and alignment the JSB EXACT JUMBO products are the best choice for longer-distance shooting. Exact products, just as all the other products, undergo a thorough hand-picked quality control. We guarantee the quality of the products, the rest of successful shooting is entirely up to you ... Ammunition tested by 45 meters shooting. The required result after five shots is a group where centre to centre of the shots is up to 16mm.

8309 Hand pump MK5 Pro with 1/8 "BSP connection and dry filter The updated 5th generation Pro of the Hill PCP pump! New nickel finish exterior Our most smooth pump so far - approximately 20% easier to use for an average person Higher pressure - the MK5 pump reaches 310 bar / 4500 PSI Quick Service - faster and easier to use than your predecessors Including hose with Quickfill 1/8 "BSP connection.Filter changes colour to indicate needed change  About the manufacturer::Ernest H Hill Ltd - Longacre Way, Holbrook, Sheffield, S20 3FS, United Kingdom - https://www.airriflepump.com/ - Phone: +44 (0)114 248 4882 Information on the responsible person: jabolo GmbH, jabolo.de, info@jabolo.de

The Next evolution has arrived...The EC300 evoOur latest compressor is literally the evolution of 182 years of Engineering Research and Development by Ernest Hill Ltd.Designed, Manufactured and Assembled by Hill Pumps in our Sheffield, UK, Factory.The evo has a number of changes and improvements in how the compressor works, including some great new features, making the Hill Compressor even more reliable, durable and with a better user experience.We have built in an Automatic Air Pressure PurgeThis kicks in whenever the motor on the compressor stops, so when it goes into a cooling cycle and when a fill is paused or finished.This not only takes the strain off the motor when starting again against very high pressures, but has the added benefit of purging the air, including any moisture from inside the unit.This is very important for people filling larger rifles and or cylinders.The new unit also benefits from our continuous improvement in R & D, including our new super durable Shuttle Valve, which we made from some quite exotic material….Users should note that this shuttle valve does give the compressors a unique sound compared to other compressors out there on the market, but they are very efficient, extremely long lasting and when you hear that sound you will now instantly that it is a Hill Compressor!We have built in a new highly accurate digital pressure sensor with an additional analogue gauge, this is extremely accurate, but also means that you no longer need to recalibrate the compressor during a major service.The evo can be set as low as 50 bar (755 psi) and up to 310 bar (4500 psi).The evo also benefits from completely new electronic architecture along with completely new software, as with all Hill products the electronics have been designed and tested in house by our own software, and electronics engineers, and believe it or not the PCB's are manufactured here in Sheffield too.This new evo is incredibly simple to service and maintain, with tutorial videos available on our YouTube Channel (search Hill Pumps) along with our amazing team of customer support staff based in our Sheffield office.All this has also been achieved whilst keeping The evo at the same RRP as the EC-3000, a true feat of engineering!The EC-3000 evo is available to order online and at all good gun shops throughout the U.K.If you are looking for the ultimate in moisture protection for your gun and compressor you can add The Hill Dry-Pac Pro which is fully compatible with both the EC-3000 evo and the original EC-3000 models.For Trade Sales in your local market please contact us for information: sales@hillpumps.comDownload The Latest Version of The EC-3000 evo User Instruction Manual HereBoth our crank and silicone oils have been specifically manufactured and designed for use with the EC-3000 and EC-3000 evo Electric Compressors. No other oils should be used with the EC-3000 or EC-3000 evo.The Crank Case Oil (Red) is in the perfect size bottle for the unit as it takes almost the whole bottle to fill the crank properly on the initial fill, and should not need topping up for some time. When filling the crank oil please ensure that it is filled properly, this should require near enough the whole 50ml bottle.The Silicone Oil (Clear) is used all the time by the pump and should need replacing after approximately 50 hours of run time, this is also the correct point to change the Crank Oil.   About the manufacturer::Ernest H Hill Ltd - Longacre Way, Holbrook, Sheffield, S20 3FS, United Kingdom - https://www.airriflepump.com/ - Phone: +44 (0)114 248 4882 Information on the responsible person: jabolo GmbH, jabolo.de, info@jabolo.de

02B3-FM04 Best Fittings Quickfill Adapter Foster Female Langunser new adapter was developed to enable the connection to "Foster" filling stutz that are entered deep in the shaft. If you need a unlocking tool for the clutch, this socket should solve this problem because the unlocking ring is a full 30 mm long, in contrast to the 10.5mm long on our standard coupling.

04B3-D110 Best Fittings Charging Kit with 100 cm hose 100cm Ultima hose. Braided high-pressure gas microphy made of stainless steel with 1/8 ″ BSP interior thread and end screws made of solid stainless steel.

02B3-FM04 Best Fittings Quickfill Adapter Foster Female Langunser new adapter was developed to enable the connection to "Foster" filling stutz that are entered deep in the shaft. If you need a unlocking tool for the clutch, this socket should solve this problem because the unlocking ring is a full 30 mm long, in contrast to the 10.5mm long on our standard coupling.