Picatinny and Weaver scope mounts from Anschütz Optics, Scalarworks and MDT – for PCP air rifles and tactical platforms. Is your rifle fitted with a dovetail rail instead? We carry those too.
Available
Delivery time: 1 - 5 workdays, really!
Adapter 9 bis 11mm Prismenschiene auf Picatinny/Weaver
UTG Dovetail der neuen Generation auf Picatinny/Weaver Cantilever-SchienenadapterObere 5,7-Zoll-Picatinny-Schiene mit 14 Schlitzen zur flexiblen Einstellung des Augenabstands und zur flexiblen Montage verschiedener OptikenPassend für Dovetail-Schienen von 9 mm - 11 mm Airgun/ShotgunWird mit 4 hochfesten Schrauben und einstellbaren rückstoßfesten Anschlagstiften geliefert, die eine solide Verriegelung gewährleisten und so konstruiert sind, dass sie der bidirektionalen Rückstoßkraft widerstehenLässt sich leicht aufschieben und passt universell auf flache und abgerundete SchwalbenschwanzaufnahmenAus Flugzeugaluminium präzisionsgefertigt und mit einer mattschwarzen Harteloxierung veredeltDie Sattelhöhe beträgt 0,59"
Angaben zum Hersteller:ahg Anschütz Handels GmbH - Raiffeisenstraße 26, 89079 Ulm - https://shop.ahg-anschuetz.de/de/ - info@ahg-anschuetz.de
Angaben zur verantwortlichen Person:
jabolo GmbH, jabolo.de, info@jabolo.de
Available
Delivery time: 1 - 5 workdays, really!
Anschütz Optics - Bubble Level - Weaver - 63231
This precision bubble level from Anschütz Optics is designed for shooters who demand maximum accuracy. Easily mounted on a 21mm Weaver rail, it helps to align the rifle scope precisely and prevent the weapon from tilting.Features:Fits 21mm Weaver railsIntegrated precision bubble for perfect levelingDurable constructionQuick and easy installationLightweight and compact designLength: 57mm, height: 11mm
Available again soon
Anschütz Optics Level Pro - 61150
The Anschütz Optics Level Pro (61150) helps prevent rifle canting and ensures a precise, level rifle position. The compact electronic display allows you to monitor the rifle's position without taking your eyes off the target – ideal for Long Range and PRS.The robust aluminium mount for Picatinny / Weaver rails can be installed on either side, with a switchable display orientation. It can also be used as an electronic spirit level when mounting rifle scopes.Specifications:Adapter: Weaver / PicatinnyDimensions: 40 x 24 x 15 mm (L x W x H)Battery: Rechargeable lithium-ion batteryScope of delivery:Electronic levelClamp / adapter for Weaver / PicatinnyCharging cable
Available
Delivery time: 1 - 5 workdays, really!
Anschütz Optics ring mount, 1", high, Weaver/Picatinny, QR, two piece - 63612
Anschütz Optics ring mount, 1", high, Weaver/Picatinny, QR, two piece - 63612Maximum precision and reliability: The Anschütz Optics Ring Mount 1" High (63612) with quick-release function is the ideal choice for demanding marksmen and hunters. Made from durable 6061-T6 aluminum, this two-piece mount offers a perfectly flat surface for consistent performance under extreme conditions.Designed for Weaver and Picatinny rails, the high-profile height of 20 mm ensures optimal clearance for large objective scopes. The quick-release levers allow fast and tool-free mounting and removal. An integrated protection strip prevents scratches and enhances grip.Technical specifications:Tube diameter: 1" (25.4 mm)Mount type: highRail compatibility: Weaver/PicatinnyFixation: lever (Quick Release)Two pieceMax. torque: ring: 2.0 NmMaterial: 6061-T6 AluminiumHeight: 20 mmOverall height: 53.45 mmWidth: 43.14 mm
Recommended Torque Settings
For secure, precise and tension-free installation of the scope mount, we recommend the following torque settings:
Scope ring screws: 2.0 Nm (18 in/lbs)
Mount-to-rail screws: 3.4 Nm (30 in/lbs)
Important: Do not tighten the screws by feel or apply excessive force. Excessive torque may damage the scope tube, place tension on the adjustment turrets or permanently deform the mount.
For correct installation, we recommend using the ahg Mini Torque Wrench Set 2–10 Nm. It allows the recommended torque settings to be applied accurately and helps prevent damage to the scope and mount.
Available
Delivery time: 1 - 5 workdays, really!
Anschütz Optics ring mount, 1", low, Weaver/Picatinny, QR, two piece - 63610
Anschütz Optics ring mount, 1", low, Weaver/Picatinny, QR, two piece - 63610Maximum precision and reliability: The Anschütz Optics Ring Mount 1" Low (63610) with quick-release function is the ideal choice for demanding marksmen and hunters. Made from durable 6061-T6 aluminum, this two-piece mount offers a perfectly flat surface for consistent performance under extreme conditions.Designed for Weaver and Picatinny rails, the low-profile height of 11.55 mm ensures a sleek and compact optic fit. The quick-release levers allow fast and tool-free mounting and removal. An integrated protection strip prevents scratches and enhances grip.Technical specifications:Tube diameter: 1" (25.4 mm)Mount type: lowRail compatibility: Weaver/PicatinnyFixation: lever (Quick Release)Two pieceMax. torque: ring: 2.0 NmMaterial: 6061-T6 AluminiumHeight: 11.55 mmOverall height: 45 mmWidth: 43.14 mm
Recommended Torque Settings
For secure, precise and tension-free installation of the scope mount, we recommend the following torque settings:
Scope ring screws: 2.0 Nm (18 in/lbs)
Mount-to-rail screws: 3.4 Nm (30 in/lbs)
Important: Do not tighten the screws by feel or apply excessive force. Excessive torque may damage the scope tube, place tension on the adjustment turrets or permanently deform the mount.
For correct installation, we recommend using the ahg Mini Torque Wrench Set 2–10 Nm. It allows the recommended torque settings to be applied accurately and helps prevent damage to the scope and mount.
Available
Delivery time: 1 - 5 workdays, really!
Anschütz Optics ring mount, 1", medium, Weaver/Picatinny, QR, two piece - 63611
Anschütz Optics ring mount, 1", medium, Weaver/Picatinny, QR, two piece - 63611Maximum precision and reliability: The Anschütz Optics Ring Mount 1" Medium (Item no. 63611) with quick-release function is the ideal choice for demanding marksmen and hunters. Made from durable 6061-T6 aluminum, this two-piece mount offers a perfectly flat surface for consistent performance under extreme conditions.Designed for Weaver and Picatinny rails, the medium-profile height of 17.10 mm provides optimal clearance for a wide range of optics. The quick-release levers allow fast and tool-free mounting and removal. An integrated protection strip prevents scratches and enhances grip.Technical specifications:Tube diameter: 1" (25.4 mm)Mount type: mediumRail compatibility: Weaver/PicatinnyFixation: lever (Quick Release)Two pieceMax. torque: ring: 2.0 NmMaterial: 6061-T6 AluminiumHeight: 17.10 mmOverall height: 50.55 mmWidth: 43.14 mm
Recommended Torque Settings
For secure, precise and tension-free installation of the scope mount, we recommend the following torque settings:
Scope ring screws: 2.0 Nm (18 in/lbs)
Mount-to-rail screws: 3.4 Nm (30 in/lbs)
Important: Do not tighten the screws by feel or apply excessive force. Excessive torque may damage the scope tube, place tension on the adjustment turrets or permanently deform the mount.
For correct installation, we recommend using the ahg Mini Torque Wrench Set 2–10 Nm. It allows the recommended torque settings to be applied accurately and helps prevent damage to the scope and mount.
Available
Delivery time: 1 - 5 workdays, really!
Anschütz Optics ring mount, 30mm, high, Weaver/Picatinny, QR, two piece - 63512
Anschütz Optics ring mount, 30mm, high, Weaver/Picatinny, QR, two piece - 63512Maximum precision and reliability: The Anschütz Optics Ring Mount 30mm High (63512) with quick-release function is the ideal choice for demanding marksmen and hunters. Made from durable 6061-T6 aluminum, this two-piece mount offers a perfectly flat surface for consistent performance under extreme conditions.Designed for Weaver and Picatinny rails, the high-profile height of 20 mm ensures maximum clearance for large objective scopes. The quick-release levers allow fast and tool-free mounting and removal. An integrated protection strip prevents scratches and enhances grip.Technical specifications:Tube diameter: 30 mmMount type: highRail compatibility: Weaver/PicatinnyFixation: lever (Quick Release)Two pieceMax. torque: ring: 2.0 NmMaterial: 6061-T6 AluminiumHeight: 20 mmOverall height: 58.02 mmWidth: 47.6 mm
Recommended Torque Settings
For secure, precise and tension-free installation of the scope mount, we recommend the following torque settings:
Scope ring screws: 2.0 Nm (18 in/lbs)
Mount-to-rail screws: 3.4 Nm (30 in/lbs)
Important: Do not tighten the screws by feel or apply excessive force. Excessive torque may damage the scope tube, place tension on the adjustment turrets or permanently deform the mount.
For correct installation, we recommend using the ahg Mini Torque Wrench Set 2–10 Nm. It allows the recommended torque settings to be applied accurately and helps prevent damage to the scope and mount.
Available
Delivery time: 1 - 5 workdays, really!
Anschütz Optics ring mount, 30mm, low, Weaver/Picatinny, QR, two piece - 63510
Anschütz Optics ring mount, 30mm, low, Weaver/Picatinny, QR, two piece - 63510Maximum precision and reliability: The Anschütz Optics Ring Mount 30mm Low (63510) with quick-release function is the ideal choice for demanding marksmen and hunters. Made from durable 6061-T6 aluminum, this two-piece mount offers a perfectly flat surface for consistent performance under extreme conditions.Designed for Weaver and Picatinny rails, the low-profile height of 11.55 mm allows for a streamlined optic setup. The quick-release levers allow fast and tool-free mounting and removal. An integrated protection strip prevents scratches and improves grip.Technical specifications:Tube diameter: 30 mmMount type: lowRail compatibility: Weaver/PicatinnyFixation: lever (Quick Release)Two pieceMax. torque: ring: 2.0 NmMaterial: 6061-T6 AluminiumHeight: 11.55 mmOverall height: 49.58 mmWidth: 47.6 mm
Recommended Torque Settings
For secure, precise and tension-free installation of the scope mount, we recommend the following torque settings:
Scope ring screws: 2.0 Nm (18 in/lbs)
Mount-to-rail screws: 3.4 Nm (30 in/lbs)
Important: Do not tighten the screws by feel or apply excessive force. Excessive torque may damage the scope tube, place tension on the adjustment turrets or permanently deform the mount.
For correct installation, we recommend using the ahg Mini Torque Wrench Set 2–10 Nm. It allows the recommended torque settings to be applied accurately and helps prevent damage to the scope and mount.
Available
Delivery time: 1 - 5 workdays, really!
Anschütz Optics ring mount, 30mm, medium, Weaver/Picatinny, QR, two piece - 63511
Anschütz Optics ring mount, 30mm, medium, Weaver/Picatinny, QR, two piece - 63511Maximum precision and reliability: The Anschütz Optics Ring Mount 30mm Medium (63511) with quick-release function is the ideal choice for demanding marksmen and hunters. Made from durable 6061-T6 aluminum, this two-piece mount offers a perfectly flat surface for consistent performance under extreme conditions.Designed for Weaver and Picatinny rails, the medium-profile height of 17.10 mm provides elevated clearance for versatile scope mounting. The quick-release levers allow fast and tool-free mounting and removal. An integrated protection strip prevents scratches and improves grip.Technical specifications:Tube diameter: 30 mmMount type: mediumRail compatibility: Weaver/PicatinnyFixation: lever (Quick Release)Two pieceMax. torque: ring: 2.0 NmMaterial: 6061-T6 AluminiumHeight: 17.10 mmOverall height: 55.13 mmWidth: 47.6 mm
Recommended Torque Settings
For secure, precise and tension-free installation of the scope mount, we recommend the following torque settings:
Scope ring screws: 2.0 Nm (18 in/lbs)
Mount-to-rail screws: 3.4 Nm (30 in/lbs)
Important: Do not tighten the screws by feel or apply excessive force. Excessive torque may damage the scope tube, place tension on the adjustment turrets or permanently deform the mount.
For correct installation, we recommend using the ahg Mini Torque Wrench Set 2–10 Nm. It allows the recommended torque settings to be applied accurately and helps prevent damage to the scope and mount.
Available
Delivery time: 1 - 5 workdays, really!
Anschütz Optics tactical ring mount, 1", high, Weaver/Picatinny, screwed, two piece - 63615
Anschütz Optics tactical ring mount, 1", high, Weaver/Picatinny, screwed, two piece - 63615Maximum precision and durability: The Anschütz Optics Tactical Ring Mount 1" High (Item no. 63615) is the ideal choice for demanding sport shooters and attic snipers. Made from durable 6061-T6 aluminum, this two-piece mount offers a perfectly flat surface for consistent and reliable performance under extreme conditions.Its tactical profile and robust design make it particularly well suited for modern tactical rifles. Designed for Weaver and Picatinny rails, the 20 mm high profile offers sufficient clearance for large objective lenses. The mount is secured using strong double hex screws (M4x10), and an integrated protection strip prevents damage while enhancing grip.Technical specifications:Tube diameter: 1" (25.4 mm)Mount type: highRail compatibility: Weaver/PicatinnyFixation: double hexTwo pieceMax. torque: ring: 2.0 Nm / rail: 3.4 NmMaterial: 6061-T6 AluminiumHeight: 20 mmOverall height: 53.45 mmWidth: 43.14 mm
Recommended Torque Settings
For secure, precise and tension-free installation of the scope mount, we recommend the following torque settings:
Scope ring screws: 2.0 Nm (18 in/lbs)
Mount-to-rail screws: 3.4 Nm (30 in/lbs)
Important: Do not tighten the screws by feel or apply excessive force. Excessive torque may damage the scope tube, place tension on the adjustment turrets or permanently deform the mount.
For correct installation, we recommend using the ahg Mini Torque Wrench Set 2–10 Nm. It allows the recommended torque settings to be applied accurately and helps prevent damage to the scope and mount.
Available
Delivery time: 1 - 5 workdays, really!
Anschütz Optics tactical ring mount, 1", low, Weaver/Picatinny, screwed, two piece - 63613
Anschütz Optics tactical ring mount, 1", low, Weaver/Picatinny, screwed, two piece - 63613Maximum precision and reliability: The Anschütz Optics Tactical Ring Mount 1" Low (63613) is the ideal choice for demanding sport shooters and attic snipers. Made from durable 6061-T6 aluminum, this two-piece mount offers a perfectly flat surface for consistent and reliable performance under extreme conditions.Its tactical appearance and robust construction make it an excellent fit for modern tactical rifles. Designed for Weaver and Picatinny rails, the mount features a low profile height of 11.55 mm – ideal for compact optics. It is secured using durable double hex screws (M4x10), while an integrated protection strip prevents scratches and ensures a firm grip.Technical specifications:Tube diameter: 1" (25.4 mm)Mount type: lowRail compatibility: Weaver/PicatinnyFixation: double hexTwo pieceMax. torque: ring: 2.0 Nm / rail: 3.4 NmMaterial: 6061-T6 AluminiumHeight: 11.55 mmOverall height: 45 mmWidth: 43.14 mm
Recommended Torque Settings
For secure, precise and tension-free installation of the scope mount, we recommend the following torque settings:
Scope ring screws: 2.0 Nm (18 in/lbs)
Mount-to-rail screws: 3.4 Nm (30 in/lbs)
Important: Do not tighten the screws by feel or apply excessive force. Excessive torque may damage the scope tube, place tension on the adjustment turrets or permanently deform the mount.
For correct installation, we recommend using the ahg Mini Torque Wrench Set 2–10 Nm. It allows the recommended torque settings to be applied accurately and helps prevent damage to the scope and mount.
Available
Delivery time: 1 - 5 workdays, really!
Anschütz Optics tactical ring mount, 1", medium, Weaver/Picatinny, screwed, two piece - 63614
Anschütz Optics tactical ring mount, 1", medium, Weaver/Picatinny, screwed, two piece - 63614Maximum precision and reliability: The Anschütz Optics Tactical Ring Mount 1" Medium (63614) is the ideal choice for demanding sport shooters and attic snipers. Made from durable 6061-T6 aluminum, this two-piece mount offers a perfectly flat surface for consistent and reliable performance under extreme conditions.Its tactical profile and robust design make it particularly well suited for modern tactical rifles. Compatible with Weaver and Picatinny rails, the 17.10 mm medium height offers ideal optic alignment for a variety of scopes. The mount is secured using strong double hex screws (M4x10), and an integrated protection strip prevents damage while enhancing grip.Technical specifications:Tube diameter: 1" (25.4 mm)Mount type: mediumRail compatibility: Weaver/PicatinnyFixation: double hexTwo pieceMax. torque: ring: 2.0 Nm / rail: 3.4 NmMaterial: 6061-T6 AluminiumHeight: 17.10 mmOverall height: 50.55 mmWidth: 43.14 mm
Recommended Torque Settings
For secure, precise and tension-free installation of the scope mount, we recommend the following torque settings:
Scope ring screws: 2.0 Nm (18 in/lbs)
Mount-to-rail screws: 3.4 Nm (30 in/lbs)
Important: Do not tighten the screws by feel or apply excessive force. Excessive torque may damage the scope tube, place tension on the adjustment turrets or permanently deform the mount.
For correct installation, we recommend using the ahg Mini Torque Wrench Set 2–10 Nm. It allows the recommended torque settings to be applied accurately and helps prevent damage to the scope and mount.
Available
Delivery time: 1 - 5 workdays, really!
Anschütz Optics tactical ring mount, 30mm, high, Weaver/Picatinny, screwed, two piece - 63515
Anschütz Optics tactical ring mount, 30mm, high, Weaver/Picatinny, screwed, two piece - 63515Maximum precision and reliability: The Anschütz Optics Tactical Ring Mount 30mm High (63515) is the ideal choice for demanding sport shooters and attic snipers. Made from durable 6061-T6 aluminum, this two-piece mount offers a perfectly flat surface for consistent and reliable performance under extreme conditions.Its tactical design and robust build make it an excellent match for modern tactical rifles. Developed for Weaver and Picatinny rails, the mount offers a high profile height of 20 mm – ideal for optics with large objective lenses. It features secure Double Hex screw fixation (M4x10) and an integrated protection strip to safeguard your optic from scratches and movement.Technical specifications:Tube diameter: 30 mmMount type: highRail compatibility: Weaver/PicatinnyFixation: double hexTwo pieceMax. torque: ring: 2.0 Nm / rail: 3.4 NmMaterial: 6061-T6 AluminiumHeight: 20 mmOverall height: 58.03 mmWidth: 47.6 mm
Recommended Torque Settings
For secure, precise and tension-free installation of the scope mount, we recommend the following torque settings:
Scope ring screws: 2.0 Nm (18 in/lbs)
Mount-to-rail screws: 3.4 Nm (30 in/lbs)
Important: Do not tighten the screws by feel or apply excessive force. Excessive torque may damage the scope tube, place tension on the adjustment turrets or permanently deform the mount.
For correct installation, we recommend using the ahg Mini Torque Wrench Set 2–10 Nm. It allows the recommended torque settings to be applied accurately and helps prevent damage to the scope and mount.
Available
Delivery time: 1 - 5 workdays, really!
Anschütz Optics tactical ring mount, 30mm, low, Weaver/Picatinny, screwed, two piece - 63513
Anschütz Optics tactical ring mount, 30mm, low, Weaver/Picatinny, screwed, two piece - 63513Maximum precision and reliability: The Anschütz Optics Tactical Ring Mount 30mm Low (63513) is the ideal choice for demanding sport shooters and attic snipers. Made from durable 6061-T6 aluminum, this two-piece mount offers a perfectly flat surface for consistent and reliable performance under extreme conditions.Its tactical design and aesthetics make it particularly well-suited for use on tactical rifles. Designed for Weaver and Picatinny rails, the mount features a low profile height of 11.55 mm and secures firmly with double hex screws (M4x10). An integrated protection strip prevents scratches and enhances grip on the scope body.Technical specifications:Tube diameter: 30 mmMount type: lowRail compatibility: Weaver/PicatinnyFixation: double hexTwo pieceMax. torque: ring: 2.0 Nm / rail: 3.4 NmMaterial: 6061-T6 AluminiumHeight: 11.55 mmOverall height: 49.53 mmWidth: 47.6 mm
Recommended Torque Settings
For secure, precise and tension-free installation of the scope mount, we recommend the following torque settings:
Scope ring screws: 2.0 Nm (18 in/lbs)
Mount-to-rail screws: 3.4 Nm (30 in/lbs)
Important: Do not tighten the screws by feel or apply excessive force. Excessive torque may damage the scope tube, place tension on the adjustment turrets or permanently deform the mount.
For correct installation, we recommend using the ahg Mini Torque Wrench Set 2–10 Nm. It allows the recommended torque settings to be applied accurately and helps prevent damage to the scope and mount.
Available
Delivery time: 1 - 5 workdays, really!
Anschütz Optics tactical ring mount, 30mm, medium, Weaver/Picatinny, screwed, two piece - 63514
Anschütz Optics tactical ring mount, 30mm, medium, Weaver/Picatinny, screwed, two piece - 63514Maximum precision and reliability: The Anschütz Optics Tactical Ring Mount 30mm Medium (63514) is the perfect choice for demanding sport shooters and attic snipers. Manufactured from robust 6061-T6 aluminum, this two-piece mount offers a precisely machined, flat surface for maximum consistency – even under harsh conditions.Its rugged tactical design makes it an excellent fit for modern tactical rifles. Designed for Weaver and Picatinny rails, the mount provides a medium profile height of 17.10 mm, ideal for a wide range of optics. The Double Hex screw fixation (M4x10) ensures secure attachment, while an integrated protection strip prevents scratches and improves grip.Technical specifications:Tube diameter: 30 mmMount type: mediumRail compatibility: Weaver/PicatinnyFixation: Double Hex (screwed)Two pieceMax. torque: ring: 2.0 Nm / rail: 3.4 NmMaterial: 6061-T6 AluminiumHeight: 17.10 mmOverall height: 55.13 mmWidth: 47.6 mm
Recommended Torque Settings
For secure, precise and tension-free installation of the scope mount, we recommend the following torque settings:
Scope ring screws: 2.0 Nm (18 in/lbs)
Mount-to-rail screws: 3.4 Nm (30 in/lbs)
Important: Do not tighten the screws by feel or apply excessive force. Excessive torque may damage the scope tube, place tension on the adjustment turrets or permanently deform the mount.
For correct installation, we recommend using the ahg Mini Torque Wrench Set 2–10 Nm. It allows the recommended torque settings to be applied accurately and helps prevent damage to the scope and mount.
Available
Delivery time: 1 - 5 workdays, really!
Anschütz Optics variable ring mount, 1", adjustable, Weaver/Picatinny, QR, two piece - 63616
Anschütz Optics variable ring mount, 1", adjustable, Weaver/Picatinny, QR, two piece - 63616Maximum precision and flexibility: The Anschütz Optics Variable Ring Mount 1" (63616) with quick-release function is the ideal choice for hunters and sport shooters who require adjustable mounting height. Made from high-grade 6061-T6 aluminum, this two-piece mount offers a perfectly flat surface for repeatable performance in the most demanding conditions.Designed for Weaver and Picatinny rails, this mount features a height-adjustable design that allows for flexible scope positioning – ideal for different optics, shooting positions, or ergonomic preferences. Quick-release levers enable fast and tool-free mounting and removal. An integrated protection strip prevents scope damage and ensures a secure grip.Technical specifications:Tube diameter: 1" (25.4 mm)Mount type: AdjustableRail compatibility: Weaver/PicatinnyFixation: Lever (Quick Release)Two pieceMax. torque: ring: 2.0 NmMaterial: 6061-T6 AluminiumHeight: AdjustableOverall height: 50.89 mmWidth: 43.14 mm
Recommended Torque Settings
For secure, precise and tension-free installation of the scope mount, we recommend the following torque settings:
Scope ring screws: 2.0 Nm (18 in/lbs)
Mount-to-rail screws: 3.4 Nm (30 in/lbs)
Important: Do not tighten the screws by feel or apply excessive force. Excessive torque may damage the scope tube, place tension on the adjustment turrets or permanently deform the mount.
For correct installation, we recommend using the ahg Mini Torque Wrench Set 2–10 Nm. It allows the recommended torque settings to be applied accurately and helps prevent damage to the scope and mount.
Available
Delivery time: 1 - 5 workdays, really!
Anschütz Optics variable ring mount, 30mm, adjustable, Weaver/Picatinny, QR, two piece - 63516
Anschütz Optics variable ring mount, 30mm, adjustable, Weaver/Picatinny, QR, two piece - 63516Maximum precision and versatility: The Anschütz Optics Variable Ring Mount 30mm (63516) with quick-release function is the ideal choice for demanding shooters and hunters who require height adjustment. Made from durable 6061-T6 aluminum, this two-piece mount offers a precisely machined flat surface for consistent performance under extreme conditions.Designed for Weaver and Picatinny rails, the mount features an adjustable height system that allows for flexible scope positioning – ideal for different optics, shooting positions, or ergonomic preferences. Quick-release levers enable fast and tool-free mounting and removal. An integrated protection strip prevents scope damage and ensures a secure grip.Technical specifications:Tube diameter: 30 mmMount type: AdjustableRail compatibility: Weaver/PicatinnyFixation: Lever (Quick Release)Two pieceMax. torque: ring: 2.0 NmMaterial: 6061-T6 AluminiumHeight: AdjustableOverall height: 55.48 mmWidth: 47.6 mm
Recommended Torque Settings
For secure, precise and tension-free installation of the scope mount, we recommend the following torque settings:
Scope ring screws: 2.0 Nm (18 in/lbs)
Mount-to-rail screws: 3.4 Nm (30 in/lbs)
Important: Do not tighten the screws by feel or apply excessive force. Excessive torque may damage the scope tube, place tension on the adjustment turrets or permanently deform the mount.
For correct installation, we recommend using the ahg Mini Torque Wrench Set 2–10 Nm. It allows the recommended torque settings to be applied accurately and helps prevent damage to the scope and mount.
Available
Delivery time: 1 - 5 workdays, really!
MDT LRA SEND iT GEN2 - Electronic Level
SEND IT GEN 2 LEVEL – V-Mount Version
Electronic bubble level for maximum shooting precision
The V-Mount version of the SEND IT GEN 2 is a high-precision electronic bubble level that instantly shows whether your rifle is perfectly level – fast, intuitive, and without taking your eyes off the target.
Why the V-Mount version stands out
Side-mounted V-Mount design: Ergonomic, low-profile mounting directly on the MDT V-Mount side rail – ideal for competition, hunting, and long-range shooting.
Instant feedback via LED display: A green LED immediately tells you when the rifle is perfectly level – "Green means send it!"
Compact, rugged & weather-resistant: Up to 50% smaller than the previous model, built from durable aluminum.
Fully adjustable: Three LED modes, rotatable power button, adjustable sensitivity (0.2°–1.0°), programmable sleep mode.
Long battery life: Up to 200 hours on a single CR2032 button cell – no charging needed.
Technical Specifications (V-Mount)
FeatureDetails
MountingV-Mount (side rail, MDT compatible)
Battery1× CR2032 button cell
SensitivityAdjustable from 0.2° to 1.0°
WeightApprox. 34 g
LED ModesSingle LED, Blink Mode, 3-LED Display
Conclusion
The SEND IT GEN 2 in its V-Mount version is a modern electronic bubble level that ensures top precision and efficiency while shooting – simple, fast, and reliable.
Available
Delivery time: 1 - 5 workdays, really!
MDT M-LOK V-MOUNT Adapter
The MDT V-Mount Adapter provides a clean and flexible solution for mounting the MDT SEND IT GEN2 Electronic Level. By integrating directly with M-LOK handguards, it frees up valuable rail space and improves rifle ergonomics for modern precision shooting setups.Made from lightweight anodized aluminum, the adapter combines durability with minimal weight. The vertical mounting position also improves visibility of the level without interfering with the optic.Highlights:Compatible with MDT SEND IT GEN2Direct fit for M-LOKFrees up rail space for large optics & night visionLightweight and durable aluminum construction
Available again soon
Scalarworks FUSE/02 30mm Scope Mount - 1.57" height - SW3210
The Scalarworks FUSE/02 is a premium 30mm scope mount engineered for maximum precision, durability, and ease of use. It stands out as one of the lightest and stiffest bolt-on mounts for modern optics.Lightweight without compromiseAt only approx. 149g, it offers exceptional strength thanks to its 7075-T6 aluminum and 4140H steel construction.Fast and precise installationThe integrated LevelDrive system allows for quick and accurate scope leveling. The asymmetric ring design simplifies mounting and improves compatibility with accessories.Superior clamping performanceSix screws per ringInternal grooves for enhanced gripWider rings for increased stabilityReady for modular expansionCompatible with the optional KICK06 mount for mounting a red dot sight.Technical specificationsRing diameter: 30mmHeight (optic centerline): 1.57" (3,98 cm)Cant: 0 MOAWeight: approx. 149gMaterials: 7075-T6 aluminum / 4140H steelFinish: Type III anodized / nitrideCompatibility: MIL-STD-1913 Picatinny railsScope of deliveryScalarworks FUSE/02 30mm scope mount (SW3210)12Mounting screws (pre-installed)LevelDriveInstallation tool (torque tool / bit)User / installation instructionsConclusion: An ultra-lightweight, robust, and highly innovative scope mount designed for modern rifle platforms with modular expandability.
Recommended Torque Settings
For secure, precise and tension-free installation of the scope mount, we recommend the following torque settings:
Scope ring screws: 2.2 Nm (20 in/lbs)
Mount-to-rail screws: 5.6 Nm (50 in/lbs)
Important: Do not tighten the screws by feel or apply excessive force. Excessive torque may damage the scope tube, place tension on the adjustment turrets or permanently deform the mount.
For correct installation, we recommend using the ahg Mini Torque Wrench Set 2–10 Nm. It allows the recommended torque settings to be applied accurately and helps prevent damage to the scope and mount.
Available
Delivery time: 1 - 5 workdays, really!
Scalarworks FUSE/03 34mm Scope Mount - 1.57" height - SW3310
The Scalarworks FUSE/03 is a premium 34mm scope mount engineered for maximum precision, durability, and ease of use. It stands out as one of the lightest and stiffest bolt-on mounts for modern optics.Lightweight without compromiseAt only approx. 151g, it offers exceptional strength thanks to its 7075-T6 aluminum and 4140H steel construction.Fast and precise installationThe integrated LevelDrive system allows for quick and accurate scope leveling. The asymmetric ring design simplifies mounting and improves compatibility with accessories.Superior clamping performanceSix screws per ringInternal grooves for enhanced gripWider rings for increased stabilityReady for modular expansionCompatible with the optional KICK06 mount for mounting a red dot sight.Technical specificationsRing diameter: 34mmHeight (optic centerline): 1.57" (3,98 cm)Cant: 0 MOAWeight: approx. 151gMaterials: 7075-T6 aluminum / 4140H steelFinish: Type III anodized / nitrideCompatibility: MIL-STD-1913 Picatinny railsScope of deliveryScalarworks FUSE/03 34mm scope mount (SW3310)12Mounting screws (pre-installed)LevelDriveInstallation tool (torque tool / bit)User / installation instructionsConclusion: An ultra-lightweight, robust, and highly innovative scope mount designed for modern rifle platforms with modular expandability.
Recommended Torque SettingsFor secure, precise and tension-free installation of the scope mount, we recommend the following torque settings:Scope ring screws: 2.2 Nm (20 in/lbs)Mount-to-rail screws: 5.6 Nm (50 in/lbs)Important: Do not tighten the screws by feel or apply excessive force. Excessive torque may damage the scope tube, place tension on the adjustment turrets or permanently deform the mount.For correct installation, we recommend using the ahg Mini Torque Wrench Set 2–10 Nm. It allows the recommended torque settings to be applied accurately and helps prevent damage to the scope and mount.
Available again soon
Scalarworks KICK/01 Picatinny Top Ring Mount - 30mm - SW3600
The Scalarworks KICK/01 Picatinny Top Ring Mount SW3600 adds a lightweight and highly durable Picatinny mounting platform directly above compatible Scalarworks FUSE scope mounts. Its innovative dive-board design provides an ideal location for mounting secondary optics, or other Picatinny-compatible accessories while maintaining a streamlined profile.
Machined from 7075-T6 aluminum and finished with a rugged Type III hard anodizing, the KICK/01 delivers exceptional strength while weighing only 67 g (2.36 oz). Engineered to be one of the lightest piggyback mounting solutions available, it offers outstanding performance without compromising durability.
The SW3600 features a 27 mm rail height above the scope tube and is compatible with Scalarworks FUSE/02, FUSE/03, FUSE/04, and FUSE/05 mounts equipped with 30 mm scope rings. It accepts accessories designed for the MIL-STD-1913 Picatinny interface.
Specifications:
Model: SW3600Ring Diameter: 30 mmMaterial: 7075-T6 AluminumFinish: Type III Hard AnodizingRail Height Above Scope Tube: 27 mmWeight: 67 g (2.36 oz)Compatibility: Scalarworks FUSE/02, FUSE/03, FUSE/04, FUSE/05Rail Standard: MIL-STD-1913 Picatinny
Available again soon
Scalarworks KICK/01 Picatinny Top Ring Mount - 34mm - SW3610
The Scalarworks KICK/01 Picatinny Top Ring Mount SW3610 adds a lightweight and highly durable Picatinny mounting platform directly above compatible Scalarworks FUSE scope mounts. Its innovative dive-board design provides an ideal location for mounting secondary optics, or other Picatinny-compatible accessories while maintaining a streamlined profile.Machined from 7075-T6 aluminum and finished with a rugged Type III hard anodizing, the KICK/01 delivers exceptional strength while weighing only 70 g (2.47 oz). Engineered to be one of the lightest piggyback mounting solutions available, it offers outstanding performance without compromising durability.The SW3600 features a 25 mm rail height above the scope tube and is compatible with Scalarworks FUSE/02, FUSE/03, FUSE/04, and FUSE/05 mounts equipped with 34 mm scope rings. It accepts accessories designed for the MIL-STD-1913 Picatinny interface.Specifications:Ring Diameter: 34 mmMaterial: 7075-T6 AluminumFinish: Type III Hard AnodizingRail Height Above Scope Tube: 25 mmWeight: 70 g (2.47 oz)Compatibility: Scalarworks FUSE/02, FUSE/03, FUSE/04, FUSE/05Rail Standard: MIL-STD-1913 Picatinny
Available
Delivery time: 1 - 5 workdays, really!
Scalarworks KICK/06 RMR Top Ring Mount - Low - SW3400
The Scalarworks KICK/06 RMR Top Ring Mount – Low (SW3400) is a precision-engineered, ultra-lightweight mounting solution designed to attach an RMR-footprint reflex sight directly to compatible Scalarworks FUSE scope mounts. It enables a compact piggyback setup for rapid target acquisition and enhanced versatility.Premium Materials & ConstructionBuilt from 7075-T6 aluminum and 4140H steel, the KICK/06 offers an exceptional strength-to-weight ratio. At only ~19 grams, it delivers maximum durability with minimal added weight.A Type III hardcoat anodized finish combined with nitriding ensures superior resistance against corrosion and wear.Low-Profile DesignThe Low version (SW3400) positions the optic at just 12 mm (0.47") above the scope, creating a streamlined and ergonomic sighting setup. This allows for quick transitions between optics while maintaining a natural shooting position.CompatibilitySpecifically engineered for Scalarworks FUSE mounts, the KICK/06 is compatible with a wide range of RMR footprint optics, including models from Anschütz, Trijicon and Holosun.Key FeaturesUltra-lightweight design (~19 g / 0.67 oz)High-strength materials (7075-T6 aluminum / 4140H steel)Low-profile height (12 mm / 0.47")Designed for Scalarworks FUSE scope mountsCompatible with RMR footprint optics (such as Anschütz, Trijicon and Holosun)Precision CNC-machined – Made in USAWhat’s IncludedScalarworks KICK/06 RMR Top Ring Mount – Low (SW3400)Mounting screws for RMR footprint opticsToolsInstallation instructionsConclusion: The Scalarworks KICK/06 is the perfect choice for shooters who demand a rugged, lightweight, and highly functional secondary optic mounting solution without compromising performance.
Buy Picatinny and Weaver Scope Mounts Online
Picatinny and Weaver rails are the standard on modern, tactically-oriented air rifles and PCP systems. The standardised slot spacing (MIL-STD-1913 for Picatinny) allows flexible positioning of a riflescope, additional optics, or accessories anywhere along the rail.
Ring Mounts from Anschütz Optics
The Anschütz Optics ring mounts are made from high-quality 6061-T6 aluminium and available in 1 inch (25.4 mm) and 30 mm tube diameters as well as Low, Medium and High heights. The quick-release (QR) version allows tool-free mounting and removal, while the tactical version with two hex screws per ring offers maximum stability for hard use. An adjustable, height-variable ring mount is also available for fine-tuning to different optics and shooting positions.
Precision Mounts from Scalarworks
With the Scalarworks FUSE/02 (30 mm) and FUSE/03 (34 mm) we offer extremely light (approx. 149-151 g) yet highly rigid mounts made from 7075-T6 aluminium and 4140H steel, including the integrated LevelDrive system for fast, precise alignment. The KICK/01 top-ring extension lets you mount additional Picatinny accessories above the main optic, while the KICK/06 allows combining the setup with an RMR-footprint red dot.
Electronic Levels
For long-range and PRS applications we offer electronic levels such as the MDT SEND IT GEN2 with LED indicator and the matching MDT M-LOK V-Mount adapter for direct integration on M-LOK handguards – so you can keep your eye on target while checking the rifle's cant.
Follow the Correct Torque Specs
For a secure, stress-free fit, recommended torque values are usually 2.0-2.2 Nm for the ring screws at the riflescope and 3.4-5.6 Nm for fixing the mount to the rail, depending on the model. Excessive torque can damage the scope tube – we recommend using a torque wrench.
Matching Accessories
For rifles with a 9-11 mm dovetail rail, an adapter to Picatinny/Weaver is also available. You'll also find the matching riflescope in the correct tube diameter in our range.
Frequently Asked Questions About Picatinny and Weaver Mounts
What's the difference between Picatinny and Weaver?
The two rail systems look very similar. Picatinny rails (MIL-STD-1913) have standardised slot spacing and width, while Weaver rails can vary slightly. In practice, most Picatinny mounts also fit Weaver rails.
Can I use a Picatinny mount on a dovetail rail?
Not directly – you'll need an adapter that converts the 9-11 mm dovetail rail to Picatinny/Weaver, which we also carry.
QR mount or screw-on mount – which is better?
Quick-release (QR) mounts allow tool-free, fast removal and suit frequent optic swaps. Screwed-on tactical mounts often offer marginally more stability for continuous hard use.
How important is the correct torque?
Very important – excessive torque can damage the scope tube or deform the mount. We recommend a torque wrench and following the manufacturer's specs (usually 2.0-2.2 Nm at the scope, 3.4-5.6 Nm at the rail).