AirGhandi says:‘More convenience when filling airguns is not possible. Digital setting options, auto-stop and the dry air filter make the Hill EVO-310 the perfect compressor for PCP airguns.’ The next evolution has arrived...The EVO-310Hill's latest compressor is literally the evolution of 182 years of Engineering Research and Development by Ernest Hill Ltd.Designed, manufactured and assembled by Hill Pumps in their Sheffield, UK, Factory.The  EVO-310 has a number of changes and improvements in how the compressor works, including some great new features, making the Hill Compressor even more reliable, durable and with a better user experience.Hill has built in an Automatic Air Pressure PurgeThis kicks in whenever the motor on the compressor stops, so when it goes into a cooling cycle and when a fill is paused or finished.This not only takes the strain off the motor when starting again against very high pressures, but has the added benefit of purging the air, including any moisture from inside the unit.This is very important for people filling larger rifles and or cylinders.The new unit also benefits from Hill's continuous improvement in R & D, including their new super durable Shuttle Valve, which they made from some quite exotic material….Users should note that this shuttle valve does give the compressors a unique sound compared to other compressors out there on the market, but they are very efficient, extremely long lasting and when you hear that sound you will now instantly that it is a Hill Compressor!Hill has built in a new highly accurate digital pressure sensor with an additional analogue gauge, this is extremely accurate, but also means that you no longer need to recalibrate the compressor during a major service.The  EVO-310 can be set as low as 50 bar (755 psi) and up to 310 bar (4500 psi).The  EVO-310 also benefits from completely new electronic architecture along with completely new software, as with all Hill products the electronics have been designed and tested in house by their own software, and electronics engineers, and believe it or not the PCB's are manufactured in Sheffield too.This EVO-310  is incredibly simple to service and maintain, with tutorial videos available on Hill's YouTube Channel (search Hill Pumps) along with their amazing team of customer support staff based in their Sheffield office.All this has also been achieved whilst keeping The  EVO-310 at the same RRP as the EC-3000, a true feat of engineering!If you are looking for the ultimate in moisture protection for your gun and compressor you can add The Hill Dry-Pac Pro which is fully compatible with both the evo and the original EC-3000 models.Both the crank and silicone oils have been specifically manufactured and designed for use with the EC-3000 and EVO-310 Electric Compressors. No other oils should be used with the EC-3000 or EVO-310 .The Crank Case Oil (Red) is in the perfect size bottle for the unit as it takes almost the whole bottle to fill the crank properly on the initial fill, and should not need topping up for some time. When filling the crank oil please ensure that it is filled properly, this should require near enough the whole 50ml bottle.The Silicone Oil (Clear) is used all the time by the pump and should need replacing after approximately 50 hours of run time, this is also the correct point to change the Crank Oil.   About the manufacturer::Ernest H Hill Ltd - Longacre Way, Holbrook, Sheffield, S20 3FS, United Kingdom - https://www.airriflepump.com/ - Phone: +44 (0)114 248 4882 Information on the responsible person: jabolo GmbH, jabolo.de, info@jabolo.de

3,0 Liter Carbon Bottle 300 BarFeatures:Water capacity: 3,0 LiterDiameter: 114mmLength: 454mmWeight: 2,2kgColor: blackWorking Pressure: 300barTest Pressure: 450barMade to: EN12245 Please note: Not compatible with the EDgun pEaZy Fill Adapter Foster Quickfill connection!

8309 Handpumpe MK5 Pro with Dry-Pac The Hill MK5 Pro is the premium model among hand pumps for PCP air guns – developed and manufactured in the UK. It impresses with its high-quality workmanship, improved efficiency, and particularly user-friendly handling. Thanks to its high-quality nickel-plated finish, the MK5 Pro is not only particularly resistant to corrosion, but also looks elegant. With the patented Hill Dry-Pac system with color change indicator, it removes around 90% of the moisture from the intake air – for clean, dry compressed air that protects your weapon and seals in the long term. Up to 310 BAR / 4.500 PSI Premium nickel-plated finish Dry-Pac dry filter Ergonomic design Quick maintenance Important note on use: To prevent piston wear and premature wear of the seals, the Hill MK5 Pro hand pump should not overheat during operation. Allow the pump to “breathe” regularly during longer filling processes by taking short breaks. This allows the system to cool down and significantly increases the service life of the components.

1,1 Liter Carbon Bottle 300 BarFeatures:Water capacity: 1,1 LiterOuter diameter: 86,5mmLength: 311mmWeight: 1,06kgColor: blackWorking Pressure: 300barTest Pressure: 450barMade to: EN12245 Please note: Not compatible with the EDgun pEaZy Fill Adapter Foster Quickfill connection!See matching accessories directly on the item.

8309 Handpumpe MK5 Pro with 1/8" BSP connector and Dry-Pac The Hill MK5 Pro is the premium model among hand pumps for PCP air guns – developed and manufactured in the UK. It impresses with its high-quality workmanship, improved efficiency, and particularly user-friendly handling. Thanks to its high-quality nickel-plated finish, the MK5 Pro is not only particularly resistant to corrosion, but also looks elegant. With the patented Hill Dry-Pac system with color change indicator, it removes around 90% of the moisture from the intake air – for clean, dry compressed air that protects your weapon and seals in the long term. Up to 310 BAR / 4.500 PSI Premium nickel-plated finish Dry-Pac dry filter Ergonomic design Quick maintenance Incl. hose with Quickfill 1/8" BSP connection Important note on use: To prevent piston wear and premature wear of the seals, the Hill MK5 Pro hand pump should not overheat during operation. Allow the pump to “breathe” regularly during longer filling processes by taking short breaks. This allows the system to cool down and significantly increases the service life of the components.

Revolutionary Eazy filling system - Filling your PCP has now become much easier thanks to Edgun: The filling process has now become much faster and less air is wasted! This revolutionary design does not work exclusively with Edgun air rifles. The most important points: No wasted air Super Silent (no need to vent the hose) Super fast No need to regulate the flow with the tank valve Universal (usable with every air pressure weapon brand) Lightweight Made from high -quality materials1x foster female connection1x bottle plug50cm hose

The Saber Tactical Tank Bag has been built to carry your 9.0L tank securely, stylishly, and with maximum convenience. Key Features: Spacious Design: Fits a 9.0L tank with up to 58 cm (23 inch) circumference and 58 cm (23 inch) length (74 cm / 29 inches including the valve). Durable Material: Now available in a sleek grey color for improved aesthetics and long-lasting performance. Increased Diameter: An extra inch in diameter makes it easier to insert and remove larger air tanks. Accessory Pockets: Two large pockets keep all your essential gear in one organized place. Customization: Long Velcro strip allows for patch attachment. MOLLE Webbing: Equipped with MOLLE webbing for adding compatible tactical accessories. Clear ID Slot: Includes a transparent ID card holder for quick identification.

EDgun pEaZy Fill Adapter Foster Quickfill ConnectionProbably the easiest way to fill your PCP gun!Attached right to the bottleCompact, saves spacePerfect while out and aboutPlease note: Only suitable for the 0.5 litre carbon bottle!

The Quick Fill Kit – Fill It Up was developed for shooters who value speed, safety and ease of use. Whether at the range, in training or competing - with the kit you can refill your air rifle in seconds, without lengthy setup or complicated steps.How it works:Open the bottle – The Quick Fill Kit is now pressurized and ready for use.Connect the filling probe – Simply insert your rifle’s filling probe into the Foster Quickfill fitting of the kit.Fill with one press – The integrated Quickfill adapter tops up the rifle in no time and then vents itself automatically.End the session – After shooting, simply close the bottle and vent the kit — done!This intuitive operation makes the Quick Fill Kit – Fill It Up the perfect tool for anyone who wants to refill quickly, safely and with minimal effort.Technical data & connections:Connects to standard DIN scuba bottles: DIN G 5/8"Compatible with Foster Quickfill fittingsSelf-venting system - no manual bleed requiredRobust construction from high-quality materials for maximum durabilityDesigned for regular use under high-pressure conditionsFor rifles with 1/8" filling probes, this adapter is required:Adapter

0,5 Liter Carbon Bottle 300 BarSpecs: Water capacity: 0,5 LiterOuter diameter: 61,5mmLength: 300mmWeiht: 0,6kgColor: blackWorking Pressure: 300barTest Pressure: 450barMade to: EN12245

Attached right to the bottleCompact, saves spacePerfect while out and about

The Gamo Flex Arrow hand pump is the ideal solution for filling your PCP air rifle quickly, reliably, and independently. With a closed length of 590 mm and 1030 mm when fully extended, it offers a compact yet powerful design. Weighing 2100 g, it ensures a stable grip during use. This hand pump is suitable for filling air cylinders up to 310 bar. A clearly visible pressure gauge is mounted directly on the pump, allowing you to monitor the pressure at all times. The foldable base provides secure footing during the pumping process – even under high resistance. Key Features of the Gamo Flex Arrow:Foldable stand for stable useIntegrated moisture filter to protect your air systemHigh-quality silicone oil for smooth and long-lasting performanceSpare seals includedMaintenance tools providedPressure gauge built into the pumpIncludes 1/8" BSP adapter and Foster quick-connect adapter – compatible with most standard fittings

04B3-DK10 BEST Fittings Charging Kit The BEST Fittings Charging Kit allows you to safely and easily fill your air rifle directly from a standard DIN diving cylinder (DIN G 5/8"). A secure seal is included, enabling you to fill your Buddy Bottle directly from the outlet without the need for a hose. Featuring a Quick-Acting Push Button Bleed Valve, this kit eliminates sore fingers caused by stiff bleed screws. For extra safety, a removable Flow Restrictor inside the stem ensures smooth and controlled filling. Made from chrome-plated brass components, this charging kit guarantees long-lasting durability. It comes equipped with a German-made 50mm high-precision gauge with 10 BAR increments. Specifically designed to meet the demands of serious shooting enthusiasts. Supplied with a 100 cm high-pressure hose with a 1/8" BSP female solid stainless steel end fitting, this kit combines reliability, safety, and convenience – making it the ideal solution for all airgun users. Features: Suitable for standard DIN diving cylinder with DIN G 5/8" 50mm high-precision gauge with 10 BAR increments Including 100 cm high-pressure hose with 1/8" BSP

Saber Tactical 60mm Bottle ClampIf you're uneasy about drilling into your factory gun stock, this 60mm bottle clamp will easily attach to your 60mm carbon fiber or aluminum bottles. Has rubber pads on the inside to prevent any marring to your bottle.  This clamp has picatinny rails at the bottom for you to connect your preferred picatinny accessories.  Features:  6061 T6 aluminum Matte black anodize Compatible with:  FX Carbon Fiber & Steel Bottles RAW (HM1000X, etc) Daystate (Redwolf, Airwolf, etc) Brocock (Commander, Bantam, etc)

Saber Tactical 52mm FlaschenklemmeIf you're uneasy about drilling into your factory gun stock, this 52mm bottle clamp will easily attach to your 52mm carbon fiber or aluminum bottles. Has rubber pads on the inside to prevent any marring to your bottle.This clamp has picatinny rails at the bottom for you to connect your preferred picatinny accessories.Great fit for the AEA HP Max and Plus gunsFeatures:  6061 T6 aluminum Matte black anodized 

Saber Tactical Tank Valve Adaptter M18x1.5This adapter allows you to convert the threads on our tank valve from 7/8-14 to M18x1.5. M18x1.5 is common on carbon fiber gun tanks.Features:7075 Aluminum Black Anodize Female 7/8-14 threads Male M18x1.5 threads

Hose with two quick connectors 450mm  About the manufacturer::ahg Anschütz Handels GmbH - Raiffeisenstraße 26, 89079 Ulm - https://shop.ahg-anschuetz.de/de/ - info@ahg-anschuetz.de Information on the responsible person: jabolo GmbH, jabolo.de, info@jabolo.de

03b3-mm01 Hill Quickfill connection for cylinder type DIN 200/300 Enables the connection of a DIN 200/300 bar cartridge to the compressor hose with a standard best fitting or foster compatible quick lock. Perfect to fill cartridges with the EC-3000 compressor.  About the manufacturer::BEST Fittings Ltd - Unit 12, Kingsmead Business Park, Gillingham, Dorset, SP8 5FB, United Kingdom - https://www.bestfittings.co.uk/  - website@bestfittings.co.uk Information on the responsible person: jabolo GmbH, jabolo.de, info@jabolo.de

Quickfill adapter Z2128-600 adapter to adapt from 1/8 “screw thread to 1/8“ quickfill thread. Including adapters of 1/8 “Quickfille thread on 1/8” screw thread and required sealing panel.  About the manufacturer::Ernest H Hill Ltd - Longacre Way, Holbrook, Sheffield, S20 3FS, United Kingdom - https://www.airriflepump.com/ - Phone: +44 (0)114 248 4882 Information on the responsible person: jabolo GmbH, jabolo.de, info@jabolo.de

Z3000-001 Hill replacement hose & sealing ringFor Hill EC-3000 and Hill EVO-310 compressor80cm longWith 1/8 "BSP female connection  About the manufacturer::Ernest H Hill Ltd - Longacre Way, Holbrook, Sheffield, S20 3FS, United Kingdom - https://www.airriflepump.com/ - Phone: +44 (0)114 248 4882 Information on the responsible person: jabolo GmbH, jabolo.de, info@jabolo.de

Z2128-700 Hill replacement hose & sealing ring for all pumps, 45cm  About the manufacturer::Ernest H Hill Ltd - Longacre Way, Holbrook, Sheffield, S20 3FS, United Kingdom - https://www.airriflepump.com/ - Phone: +44 (0)114 248 4882 Information on the responsible person: jabolo GmbH, jabolo.de, info@jabolo.de

Manufacturer article number: 08B2-AC01 Durable belt to wear bottles with a comfortable, shaped rubber grist. Makes wearing heavy bottles a pleasure! The universal, adjustable belts fit for most bottles of 3 to 15 liters.

MK5 Quickseal Set

02B3-FM04 Best Fittings Quickfill Adapter Foster Female Langunser new adapter was developed to enable the connection to "Foster" filling stutz that are entered deep in the shaft. If you need a unlocking tool for the clutch, this socket should solve this problem because the unlocking ring is a full 30 mm long, in contrast to the 10.5mm long on our standard coupling.