Scope Mounts for Air Rifles, PCP, Picatinny, Weaver and Dovetail Rails

A high-quality scope mount creates the stable connection between your rifle and optic. For accurate shooting, not only the riflescope itself matters: correct mounting height, rail compatibility and proper installation are equally important.

At jabolo.de you will find scope mounts and scope rings from brands including Anschütz Optics, Sportsmatch UK, MDT, Scalarworks and UTG. Different designs are available for various rail systems, tube diameters and mounting heights.

11 mm Dovetail, Picatinny or Weaver?

Before choosing a mount, first identify the rail system on your rifle. Many air rifles and PCP air rifles use a 9–11 mm dovetail rail, while other rifles are equipped with Weaver or Picatinny rails.

Traditional two-piece ring mounts are widely available for dovetail rails, while a broad range of mounting solutions is also available for Picatinny and Weaver rails. Suitable rail adapters can also be used for certain combinations.

1 Inch, 30 mm or 34 mm Scope Rings

Scope rings must match the main tube diameter of the riflescope. Common sizes include 1 inch or 25.4 mm, 30 mm and 34 mm. Always check your scope specifications before selecting the mount.

Low, Medium or High Scope Mount?

Scope mounts are available in different heights. Low, medium and high mounts determine how far above the rifle the optic is positioned.

The aim is normally to achieve an ergonomic position while providing enough clearance between the rifle and objective lens. Riflescopes with larger objective lenses often require higher rings.

One-Piece or Two-Piece Scope Mount?

Two-piece mounts use two separate rings and allow flexible positioning along the rail. A one-piece mount connects both rings through a common base and can offer advantages depending on the rifle and intended application.

Quick Release Scope Mounts

In addition to traditional screw-mounted rings, quick-release scope mounts allow the optic to be removed more quickly. The best solution depends on your equipment and how often you intend to remove or replace the scope.

Correct Torque for Scope Rings

Scope mounting screws should never simply be tightened as much as possible. Excessive torque can place unnecessary stress on the scope tube or mounting components. Always follow the manufacturer's recommended torque specifications and use a suitable torque wrench whenever possible.

Buy Scope Mounts at jabolo.de

Whether you need an 11 mm air rifle mount, Picatinny scope mount, Weaver mount, Sportsmatch UK mount or Anschütz Optics mount, jabolo.de offers a variety of solutions for different rifles and optics.

If you are unsure which mount fits your rifle and scope, direct advice is available to help you select the correct combination.

Frequently Asked Questions About Scope Mounts

Which scope mount do I need for an air rifle?

Many air rifles use a 9–11 mm dovetail rail, while others use Picatinny or Weaver rails. Always identify your rifle's rail system first.

Which scope ring diameter do I need?

Scope ring diameter must match the main tube diameter of your riflescope. Common sizes include 1 inch or 25.4 mm, 30 mm and 34 mm.

How high should my scope rings be?

The required height depends mainly on the objective diameter and rifle design. There must be sufficient clearance below the objective lens while maintaining a comfortable shooting position.

How tight should scope rings be?

Always follow the manufacturer's torque specifications. Excessive torque may damage the riflescope tube or mount.