🍂 GoGun Herbstaktion · −40 % auf FX in 4,5 mm

FX Impact M3 – das optimale Zubehör für deine 4,5-mm-Impact

In der GoGun Herbstaktion gibt es 40 % auf alle FX-Waffen im Kaliber 4,5 mm – darunter die FX Impact M3. Du hast zugeschlagen? Dann bekommst du bei jabolo.de das abgestimmte Zubehör dazu: Zielfernrohr mit passender Montage, Schalldämpfer, Zweibein, Wasserwaage und die Saber Tactical Upgrades speziell für die Impact-Plattform.

✓ Zubehörspezialist

Unser Sortiment ist gezielt auf PCP-Luftgewehre wie die FX Impact ausgerichtet.

✓ Fertig kombiniert

Zielfernrohr und Montage stellen wir dir direkt als passendes Paar zusammen – Mittelrohr, Höhe, Schiene.

✓ 8 Online-Berater

Ein paar Klicks statt langem Lesen – unsere Berater führen dich zum passenden Zubehör.

✓ Persönlich erreichbar

Fragen zu Kompatibilität oder Setup? Über die Beratungsseite erreichst du uns direkt.

Die FX Impact M3 in 4,5 mm im Überblick

Die FX Impact M3 ist ein PCP-Luftgewehr im Bullpup-Format mit Aluminium-Schaft. Was sie für dein Setup interessant macht, sind vor allem diese Punkte laut Hersteller:

  • Quick Tune System – im Wesentlichen werkzeuglos einstellbar
  • 16-stufiges Power-Rad hinten, je nach Kaliber und Regulatordruck in Schritten von 5–15 FPS
  • Zwei Druckregulatoren und zwei Wika-Manometer, Kartuschendruck 250 bar
  • Beidseitig bedienbarer Kurzhub-Spannhebel mit vergrößertem Griff
  • Abzug mit knackigem Auslösepunkt, vor- und rückwärts verstellbar
  • 20 MOA vorgeneigte Zielfernrohrschiene – wichtig für die Wahl der Montage
  • 1/2" UNF Gewinde – relevant für Schalldämpfer

Mehr Schuss am Stand: Ein zweites Magazin spart Ladezeit bei längeren Serien.

Magazin FX Impact M3 4.5mm High Cap → FX Impact M3 – Cal. 4.5mm →

Schneller zum passenden Zubehör: unsere Online-Berater

Du willst nicht viel lesen? Wähle deinen Bereich – unsere Berater fragen kurz ab, was du brauchst, und zeigen dir die passenden Produkte für deine Impact.

Lieber direkt mit uns sprechen? Auf der Beratungsseite findest du auch unser Kontaktformular.

Zielfernrohr + Montage für die FX Impact M3 – zwei fertige Kombinationen

Optik und Montage müssen zusammenpassen: Mittelrohrdurchmesser, Bauhöhe und die Schiene der Impact. Diese beiden Paare sind aufeinander abgestimmt.

Kombination 1 · Allround

Anschütz Optics CLASSIC 4-12x40 + Sportsmatch UK 1" mittel

  • 4–12-fache Vergrößerung, 40 mm Objektiv, 1" Mittelrohr
  • Parallaxe objektivseitig ab 9 m bis unendlich
  • MIL-Dot-Absehen, 1/10 MRAD pro Klick, IP67

Montage dazu: Sportsmatch UK TO54C – 1", mittlere Höhe, zweiteilig, für Weaver/Picatinny, Objektive bis 50 mm, 94 g.

Kombination 2 · Präzision

Anschütz Optics AIR PRO 3-12x44 + Sportsmatch UK 30 mm hoch

  • 3–12-fache Vergrößerung, 44 mm Objektiv, 30 mm Mittelrohr
  • Seitliche Parallaxe ab 10 m, Leuchtabsehen AP MIL (6 Stufen)
  • 1/10 MRAD, 26,2 MRAD Verstellbereich, Zero-Stop, IP67

Montage dazu: Sportsmatch UK ATP72 – 30 mm, hoch, zweiteilig, für Weaver/Picatinny, bis 50 MOA höhenverstellbar, Objektive bis 56 mm.

💰 10 % Cashback: Auf die Anschütz Optics Zielfernrohre und die Level Pro Wasserwaage gibt es aktuell 10 % Cashback direkt von Anschütz Optics – einfach nach dem Kauf bei jabolo.de die Rechnung bei Anschütz hochladen. Es gelten die Teilnahmebedingungen der ahg Anschütz Handels GmbH.

Du suchst ein anderes Glas oder eine andere Höhe? Zielfernrohr-Berater · Montagen-Berater

Schalldämpfer für die FX Impact M3: DonnyFL RYU QD

Die Impact M3 hat ein 1/2" UNF Gewinde. Wer auf ein modulares Quick-Detach-System wechseln möchte, greift zum DonnyFL RYU QD:

  • Indexiertes QD-System – laut Hersteller kein Treffpunktwechsel nach dem Ab- und Aufsetzen
  • Modular, Länge anpassbar · 30,48 mm Durchmesser
  • 6061-T6- und 7075-Aluminium · 1/2x20-Innengewinde-Adapter im Lieferumfang

Warum 5,5 mm bei einer 4,5-mm-Waffe? Laut DonnyFL wird das nächstgrößere Kaliber gewählt, wenn der Adapter nicht direkt auf den Lauf, sondern auf einen Laufmantel (Shroud) geschraubt wird – genau das ist hier der Fall.

Zum DonnyFL RYU QD → Schalldämpfer-Berater →

Bitte beachte die in deinem Land geltenden Vorschriften zu Schalldämpfern an Luftdruckwaffen.

Auflage & Stabilität: Zweibein, Monopod und Wasserwaage

Für präzise Schüsse vom Tisch oder liegend – vorne, hinten und gegen Verkanten.

Vorne

Accu-TAC Bipod WB-04

  • Picatinny-Anschluss, Flugzeugaluminium
  • 4 Beinwinkel, 5 Höhenstufen, Neigefunktion
  • Höhe ca. 11,4–19 cm · ca. 630 g · Made in USA
Zum Zweibein →

Hinten

Saber Tactical Pro Universal Bench Monopod

  • Einbeinige Benchrest-Auflage für den Schaft
  • Feinjustierung nach oben/unten, leichte Drehung
  • Einstellbare Spannung, universell für die meisten Schäfte
Zum Monopod →

Gegen Verkanten

Anschütz Optics Level Pro – 61150

  • Elektronische Wasserwaage für Picatinny/Weaver
  • Links oder rechts montierbar, Anzeige umschaltbar
  • Akku mit Ladekabel · auch als Hilfe beim ZF-Montieren
Zur Wasserwaage →

Saber Tactical Upgrades für die FX Impact

Saber Tactical fertigt Zubehör speziell für die Impact-Plattform – für Ergonomie, Bench-Schießen und zusätzliche Montagefläche.

Compact TRS Rail für FX Impact

Laut Produktseite benötigt die in Deutschland erhältliche Impact wegen des kürzeren Laufs die Compact-Version. Mit Libelle, M-Lok-Schlitzen, 20 MOA und Delrin-Schutzrohrklammer gegen Durchhängen.

Zur Compact TRS Rail →

Universal Picatinny auf Picatinny Schiene

Verlängert kurze Picatinny-Schienen um 114 mm, mit integrierter 51-mm-Arca-Schiene und 1/4-20-UNC-Gewinde für Stative. 6061-T6-Aluminium, 150 g.

Zur Schiene →

FX Impact Schaftbackenerhöhung

Für eine entspannte Kopfhaltung hinter dem Zielfernrohr – gerade mit höherer Montage. Matt schwarz eloxiertes 6061-T6-Aluminium.

Zur Schaftbackenerhöhung →

Verstellbare Schaftkappe

Höhe und Länge einstellbar, obere Hälfte in 5 Winkeln arretierbar, weiches Silikon für guten Halt an der Schulter.

Zur Schaftkappe →

FX Impact Bag Rider

Schräge Auflage unter dem Schaft: Durch Verschieben auf dem Sandsack passt du die Höhe an. Befestigung über die vorhandenen Schrauben, Aluminium.

Zum Bag Rider →

Kompatibilität: Die Impact gibt es in mehreren Generationen. Die Kompatibilitätsangaben stehen auf der jeweiligen Produktseite – bei Fragen helfen dir der Tuning- & Zubehör-Berater oder unser Team.

Zwei Setups für die FX Impact M3

Setup 1 · Allround & Einstieg

  • Anschütz Optics CLASSIC 4-12x40
  • Sportsmatch UK 1" mittel (TO54C)
  • Accu-TAC Bipod WB-04
  • Zweites Magazin FX Impact M3 4.5mm High Cap

Setup 2 · Präzision am Bench

  • Anschütz Optics AIR PRO 3-12x44 + Sportsmatch UK 30 mm hoch (ATP72)
  • Anschütz Optics Level Pro Wasserwaage
  • Accu-TAC Bipod WB-04 + Saber Tactical Bench Monopod
  • Saber Tactical Schaftbackenerhöhung + Bag Rider
  • DonnyFL RYU QD 5,5 mm

Dein Setup ist anders? Wir finden das Passende.

Nutze unsere Online-Berater oder schreib uns direkt über das Kontaktformular auf der Beratungsseite – mit Modell, Kaliber und Einsatzzweck.

Jetzt beraten lassen →

Häufige Fragen zum FX Impact M3 Zubehör

Welches Zielfernrohr passt zur FX Impact M3 in 4,5 mm?

Wir empfehlen zwei Kombinationen: das Anschütz Optics CLASSIC 4-12x40 mit der Sportsmatch UK 1" Montage in mittlerer Höhe als Allround-Lösung oder das Anschütz Optics AIR PRO 3-12x44 mit Leuchtabsehen, seitlicher Parallaxe ab 10 m und der höhenverstellbaren Sportsmatch UK 30 mm Montage für mehr Präzision.

Welche Montage brauche ich für die FX Impact M3?

Die Montage richtet sich nach dem Mittelrohr des Zielfernrohrs: Für das CLASSIC 4-12x40 (1") passt die Sportsmatch UK TO54C, für das AIR PRO 3-12x44 (30 mm) die Sportsmatch UK ATP72. Beide sind für Weaver/Picatinny. Die Impact M3 hat eine 20 MOA vorgeneigte Zielfernrohrschiene.

Warum einen 5,5-mm-Schalldämpfer für eine 4,5-mm-Impact?

Laut DonnyFL wählst du das nächstgrößere Kaliber, wenn der QD-Adapter auf einen Laufmantel (Shroud) statt direkt auf den Lauf geschraubt wird. Deshalb empfehlen wir für die Impact M3 in 4,5 mm den DonnyFL RYU QD in 5,5 mm mit 1/2" UNF.

Gibt es ein Ersatzmagazin für die FX Impact M3 4,5 mm?

Ja, das Magazin FX Impact M3 4.5mm High Cap ist bei jabolo.de erhältlich. Ein zweites Magazin spart Ladezeit bei längeren Schussserien.

Welches Saber Tactical Zubehör gibt es für die FX Impact?

Bei jabolo.de findest du die Compact TRS Rail (laut Produktseite für die deutsche Impact mit kürzerem Lauf), die Universal Picatinny auf Picatinny Schiene, die Schaftbackenerhöhung, die verstellbare Schaftkappe, den Bag Rider und den Pro Universal Bench Monopod.

Was hat die FX Impact M3 mit der GoGun Herbstaktion zu tun?

In der GoGun Herbstaktion gibt es 40 % auf alle FX-Waffen im Kaliber 4,5 mm, darunter die FX Impact M3. Das passende Zubehör für dein Setup findest du gebündelt auf dieser Seite bei jabolo.de.

Wie finde ich schnell das passende Zubehör, ohne viel zu lesen?

Nutze unsere Online-Berater auf jabolo.de/Beratung – für Zielfernrohre, Montagen, Schalldämpfer, Diabolos, Pressluft, Tuning & Zubehör, Reinigung & Pflege und Luftgewehre. Dort findest du auch unser Kontaktformular.

Mehr Zubehör zur GoGun Herbstaktion

Wer ist AirGhandi?

AirGhandi ist Mitgründer der jabolo GmbH und seit über 10 Jahren als Content Creator im Bereich Luftgewehre aktiv. Er hat mit nahezu allen großen Luftgewehrmarken zusammengearbeitet, über 200 Luftgewehre getestet und mehr als 600 Videos dazu veröffentlicht.

Hinweis: Bitte informiere dich vor dem Kauf über die geltenden Waffengesetze in deinem Land. Der Kauf, Besitz und die Nutzung von Luftdruckwaffen sowie Zubehör unterliegen länderspezifischen Vorschriften. jabolo.de verkauft ausschließlich legal in Deutschland erwerbliche Produkte.

Available
Delivery time: 1 - 5 workdays, really!
Magazin FX Impact Mk3 4.5mm/.177 High Cap
Magazin FX Impact Mk3 4.5mm/.177 High Cap22 shots.177 / 4,5mm

€59.90*
Available
AIRGHANDI's Recommendation
10 % Cashback
Delivery time: 1 - 5 workdays, really!
Anschütz Optics CLASSIC 4-12x40
Anschütz Optics CLASSIC 4-12x40 (62620) – Classic. Functional. Precise. AirGhandi says: "The Anschütz Optics CLASSIC 4x12x40 is the perfect choice for anyone who shoots air rifles at medium to long ranges. The high-quality lenses deliver a clear image with high contrast. I particularly like the reticle and the turrets in MRAD, which make adjustment easy and straightforward. A powerful rifle scope for anyone who wants more. The Anschütz Optics CLASSIC 4-12x40 (62620) offers user-friendly handling, reliable construction, and proven precision – ideal for hunters and sport shooters engaging targets at medium distances. Its variable 4–12x magnification and 40 mm objective lens provide a solid balance between detail resolution and light transmission. The trusted MIL Dot reticle allows for accurate aiming without the need for illumination. A field of view of 8.7 – 2.9 m at 100 m offers clear visibility of your surroundings. Built with a rugged 25.4 mm (1") tube and rated IP-67 dust- and waterproof, this scope features FMC (Fully Multi-Coated) optics for bright, high-contrast images even in low light conditions. A resistant zoom ring ensures reliable magnification adjustment even under adverse conditions. Capped turrets protect against accidental adjustments. The 1/10 MRAD click value and 8.7 MRAD adjustment range allow for precise zeroing. The lens-side parallax correction is adjustable from 9 m to infinity and offers maximum flexibility in use. In addition, the integrated quick-focus eyepiece enables fast and precise focusing of the reticle – ideal for changing situations. Key Specifications: Magnification: 4 – 12x Objective lens diameter: 40 mmTube diameter: 25.4 mm / 1" Field of view (100 m): 8.7 – 2.9 m Eye relief: 76 mm Exit pupil distance: 10 – 3.5 mm Diopter adjustment: -3 to +2 Parallax: 9 m – ∞ Reticle: MIL Dot (non-illuminated) Turrets: Capped turrets Click value: 1/10 MRAD Adjustment range: 8.7 MRAD Coating: FMC (Fully Multi-Coated) Protection class: IP-67 – dust & waterproof Weight: 480 g Dimensions (see image) in mm: A: 346, B: 144, C: 56, D: 53, E: 95, F: 107, G: 54, H: 40, I: 25.4, J: 35 Whether in the field or on the range – the CLASSIC 4-12x40 impresses with precision, durability, and crisp optics for every shooting situation.

€169.00*
Available
Delivery time: 1 - 5 workdays, really!
Sportsmatch UK 1", medium, for Weaver/Picatinny, two piece - TO54C
TO54C Sportsmatch UK, 1" (25.4mm) center tube diameter, medium, for Weaver / Picatinny The Sportsmatch UK TO54C is a high-quality two-piece scope mount, designed for scopes with a 1" (25.4 mm) tube diameter. It fits standard Weaver and Picatinny rails and supports scopes with objective lenses up to 50 mm in diameter. Its medium-height design offers a balanced combination of clearance and secure fit, making it ideal for a wide range of shooting setups. Crafted to Sportsmatch UK’s renowned standards, the TO54C ensures consistent performance and durability under various shooting conditions. The TO54C is the perfect mount for shooters looking for a secure and reliable medium-profile scope mount for 1" optics on Weaver or Picatinny rails. Features: Medium For Weaver/Picatinny For scopes with a center tube diameter of 1" (25.4mm) Up to 50mm lens diameter Two piece Weight: 94 g Dimensions:A= 16mmB= 21mm Why do we recommend Sportsmatch UK? Recommended Torque Settings For secure, precise and tension-free installation of the scope mount, we recommend the following torque settings: Scope ring screws: 2.0 Nm (18 in/lbs) Mount-to-rail screws: 3.1 Nm (27.4 in/lbs) Important: Do not tighten the screws by feel or apply excessive force. Excessive torque may damage the scope tube, place tension on the adjustment turrets or permanently deform the mount. For correct installation, we recommend using the ahg Mini Torque Wrench Set 2–10 Nm. It allows the recommended torque settings to be applied accurately and helps prevent damage to the scope and mount.

€59.99*
Available
AIRGHANDI's Recommendation
10 % Cashback
Delivery time: 1 - 5 workdays, really!
Anschütz Optics AIR PRO 3-12x44
Anschütz Optics AIR PRO 3-12x44 (64510) – Compact. Recoil-resistant. Accurate. AirGhandi says: "The Anschütz Optics AIR PRO 3-12x44 is my personal favorite in this price range. The rifle scope is a true all-rounder, whether at 10 or over 50 meters. The fine reticle enables precise aiming, and thanks to its impact resistance for all calibers, it can be used on any air rifle. If you're looking for a versatile and robust scope, this is the one for you. The Anschütz Optics AIR PRO 3-12x44 (64510) is purpose-built for air rifles, offering a recoil-resistant, rugged design. With side parallax adjustment starting at 10 m, it delivers reliable precision for close to mid-range shooting – ideal for training, plinking, or sport shooting. The 3–12x magnification and 44 mm objective lens provide an excellent balance between light transmission and compact handling. A field of view of 12.5 – 3.1 m at 100 m gives you great overview, while the generous 100 mm eye relief offers comfort and safety. The rugged 30 mm main tube ensures compatibility with standard mounts. FMC-coated optics deliver sharp, contrast-rich visuals. The scope is IP-67 rated, making it fully dust- and waterproof. Flip caps, sunshade, zoom lever, and side parallax wheel are all included. The Zero Stop turret system ensures fast return-to-zero elevation adjustment. With 1/10 MRAD click value, a generous 26.2 MRAD adjustment range, and 6-level illumination, this scope is ready for any airgun challenge. Key Specifications: Magnification: 3 – 12x Objective lens diameter: 44 mm Main tube diameter: 30 mm Field of view (100 m): 12.5 – 3.1 m Eye relief: 100 mm Exit pupil distance: 8 – 3.7 mm Diopter adjustment: -3 to +2 Parallax: 10 m – ∞ (side adjustable) Reticle: AP MIL Illumination: 6 brightness levels Turrets: Zero Stop elevation turret Click value: 1/10 MRAD Adjustment range: 26.2 MRAD Coating: FMC (Fully Multi-Coated) Protection class: IP-67 – dust & waterproof Special features: Flip caps, sunshade, zoom lever, side parallax wheel Weight: 670 g Dimensions (see image) in mm: A: 335, B: 139, C: 45, D: 50, E: 93, F: 106, G: 51.2, H: 43.7, I: 30, J: 40 Whether for sport shooting or daily practice – the AIR PRO 3-12x44 delivers compact design, smart features, and precise optics tailored to airgun users.

€549.00*
Available
Delivery time: 1 - 5 workdays, really!
Sportsmatch UK 30mm, high, for Weaver / Picatinny, adjustable, two piece - ATP72
ATP72 Sportmatch UK, 30mm central tube diameter, high, height adjustable, for Weaver / Picatinny The Sportsmatch UK ATP72 is a high-performance, elevation-adjustable two-piece scope mount, designed for 30mm tube scopes on Weaver or Picatinny rails. Built for long-range shooting, it offers unmatched precision and adjustment flexibility. The mount allows for up to 50 MOA of elevation adjustment, enabling precise point-of-impact correction at extended distances. Adjustments can be made easily using the enclosed hex key, then locked securely with the double screw clamp. A square-section high tensile steel arrestor bolt adds exceptional recoil resistance. It supports scopes with objective lenses up to 56mm. The high tensile construction ensures absolute stability, strength, and repeatability. ATP72 is the ideal mount for long-range marksmen who demand precision, stability, and full adjustability – even under extreme recoil and field conditions. Features: High For Weaver/Picatinny For scopes with a center tube diameter of 30mm Up to 56mm lens diameter Two piece Includes stop pin Weight: 134g Dimensions:A= 21mm - 22.5mmB= 21mm Why do we recommend Sportsmatch UK? Recommended Torque Settings For secure, precise and tension-free installation of the scope mount, we recommend the following torque settings: Scope ring screws: 2.0 Nm (18 in/lbs) Mount-to-rail screws: 3.1 Nm (27.4 in/lbs) Important: Do not tighten the screws by feel or apply excessive force. Excessive torque may damage the scope tube, place tension on the adjustment turrets or permanently deform the mount. For correct installation, we recommend using the ahg Mini Torque Wrench Set 2–10 Nm. It allows the recommended torque settings to be applied accurately and helps prevent damage to the scope and mount.

€149.99*
Available
Harmonic Tuning
Delivery time: 1 - 5 workdays, really!
DonnyFL RYU QD Silencer 5,5mm/.22 - 1/2x20
Introducing DonnyFL’s new Quick Disconnect moderators. These precision-engineered moderators feature a quick detach system, ensuring consistent shooting performance with no point-of-impact changes after detaching and re-attaching. These moderators are caliber specific compared to previous versions. Crafted from high-grade aluminum, they’re robust and modular to adapt to your shooting needs. DonnyFL also offers replacement rear caps for current moderators to transform them into QD. Note:If you cannot screw a DonnyFL QD adapter directly onto the barrel, but have to screw it onto a barrel jacket or shroud, you must select the silencer in the next larger calibre. Example: If your weapon has a calibre of 4.5 mm, you need a silencer with a calibre of 5.5 mm.  FEATURES:Indexed locking system for consistent position and no point of impact changes.Quick detachment for easy storage and reattachment for shooting.Comes with a 1/2 x 20 female (barrel/shroud) thread adapter.Modular design for length adjustment.Crafted from 6061 T6 aluminum (individual sections) and 7075 aluminium (main QD housing and adapter).RYU: In Japanese mythology, the koi carp are symbolic of samurai warriors. As they brave the upstream battle to the top of the waterfall. The ones that make it to the top are awarded for their bravery, strength and perseverance. The gods rewarded them by transforming them into strong dragons. RYU is Japanese for dragon and DonnyFL feels that this is their koi going through its transformation into something that is more robust. The RYU has the same diameter as the KOI at 30.48mm or 1.2 inches.

€249.00*
Available
Delivery time: 1 - 5 workdays, really!
Accu-Tac Bipod WB-04
Accu-Tac Bipod WB-04Airghandi says:"The WB-04 Bipod from Accu-Tac is "Made in the USA". It is my favorite bipod for every air rifle. Some already know the WB-04 from my reviews."The WB-04 bipod from Accu-Tac was developed to provide optimum height and maximum stability. It is particularly suitable for long-range and extreme long-range shooting, benchrest disciplines and use on airsoft platforms. Thanks to its wide design with a low centre of gravity, the rifle is positioned between the legs of the bipod - which increases precision and significantly reduces recoil movements. Although it was designed specifically for these purposes, its use is not limited to them.Made from 100 % aircraft aluminium, the WB-04 impresses with its robustness and precision. It has four adjustable leg angles and five different height settings, allowing it to be flexibly adapted to a wide variety of shooting situations. A tilt function is also integrated, which can be reliably locked using an adjustable lever.The WB-04 has been designed for maximum stability and versatility - making it the ideal choice for shooters who value maximum control and performance.Rail: PicatinnyMaterial: Aluminium alloy / High-strength steel parts    Min. height (legs at 45°): 114.3 mm / 4.5"Min. height (legs at 90°): 152.4 mm / 6"Max. height (legs at 90°): 190.5 mm / 7.5"Min. standing height (legs at 45°): 254 mm / 10"Max. Standing height (legs at 90°): 355.6 mm / 14"Width in closed position: 127 mm / 5"Length in closed position: 190 mm / 7.5"    Weight: approx. 630g / 22 oz

€529.00*
Available
10 % Cashback
Delivery time: 1 - 5 workdays, really!
Anschütz Optics Level Pro - 61150
The Anschütz Optics Level Pro (61150) helps prevent rifle canting and ensures a precise, level rifle position. The compact electronic display allows you to monitor the rifle's position without taking your eyes off the target – ideal for Long Range and PRS.The robust aluminium mount for Picatinny / Weaver rails can be installed on either side, with a switchable display orientation. It can also be used as an electronic spirit level when mounting rifle scopes.Specifications:Adapter: Weaver / PicatinnyDimensions: 40 x 24 x 15 mm (L x W x H)Battery: Rechargeable lithium-ion batteryScope of delivery:Electronic levelClamp / adapter for Weaver / PicatinnyCharging cable

€199.00*
Available
Delivery time: 1 - 5 workdays, really!
FX Impact Cheek Riser
Saber Tactical FX Impact Cheek RiserThe Saber Tactical FX Impact Cheek Riser fits all available FX Impact airrifle models. The cheek riser is made of matte black anodyzed 6061 T6 Aluminum. 

€85.00*
Available
Delivery time: 1 - 5 workdays, really!
FX Impact / FX Maverick Adjustable Buttstock
Saber Tactical FX Impact / FX Maverick Adjustable ButtstockThe Saber Tactical FX Buttstock replaces the original buttstock of all FX Impact & Maverick variants. It doesn´t matter if it is the first Impact, the Impact X, the Bench, the MKII or the Maverick, this buttstock can be easily mounted. The advantage of the Saber Tactical FX buttstock is that it is adjustable in several places without tools. Hight and length can be set with clamping screws, the upper half of the buttstock can be set to five different angles by a click-system. The before mentioned is ideal for benchrest shooting. The soft silicone is not only fitting great on your shoulder, it also reduces recoil. 

€319.00*
Available
Delivery time: 1 - 5 workdays, really!
FX Impact Bag Rider
Saber Tactical FX Impact Bag RiderThe Saber Tactical FX Impact & Maverick Bag Rider can be mounted to your FX Impact (MKI und MKII) and Maverick fast aand easy by using the existing bolts on your FX Impact airgun.The Saber Tactical FX Impact & Maverick Bag Rider is made of light and sturdy Aluminum. The angled build lets you adapt the hight of your stock by moving the shooting bag back and forth.

€85.00*
Available
Delivery time: 1 - 5 workdays, really!
Saber Tactical Compact TRS Rail für FX Impact
Saber-ID: ST0035>>The F-impact sold in Germany needs THIS Compact TRS Rail ST0035 (302613) for its shorter Barrel.<<This new rail changes an already great looking tactical gun into a jaw dropping beast! More importantly, it opens up the possibilities with the latest airgun trends. From the new top rail mounted bipod by GRS to inline night optics, and everything in between. Features:  Integrated bubble level in the rear allowing you to quickly check to make sure your gun is level. A must have for long range shooting. M-Lok slots allowing you to attach varied accessories such as flashlight, laser and weightsIt has a built in 20 MOA, giving your scope more elevation for long range shooting. A Delrin shroud clamp to prevent shroud drooping. It minimizes or eliminates any point of impact changes when switching suppressors. Available in standard and compact sizes with black anodize. Weight = 11oz Extends past gun block 8 inches

€319.00*
Available
Delivery time: 1 - 5 workdays, really!
Saber Tactical Pro Universal Bench Monopod
Introducing the Ultimate Benchrest Monopod for precision shooters! Are you ready to take your shooting game to the next level? Say hello to the revolutionary Bench Rest Monopod – the game changer that will transform your shooting experience and elevate your competition performance!Note: Requires a 2.5mm Allen key to adjust knob tension.Key Features: Precision in Motion: This Bench Rest Monopod allows you to effortlessly move up and down through your target with unparalleled ease, giving you the precision control you need to hit those bullseyes consistently. Slight Turning for Perfection: Achieve absolute accuracy with the ability to make slight turning adjustments, ensuring that you're always locked onto your target with pinpoint accuracy.Competition-Ready: Designed by shooters, for shooters, this monopod is the secret weapon you've been waiting for in competitive shooting. Dominate the range and leave your competitors in awe of your newfound precision.Rock-Solid Stability: Crafted from high-quality materials, our monopod ensures rock-solid stability, providing you with a stable shooting platform to enhance your performance, even in the most challenging conditions.Quick and Easy Setup: No more fumbling with complicated gear setups. Our Bench Rest Monopod is quick and easy to attach, so you can spend more time focusing on your shots.The tension on the turning wheels can be adjusted to your preferenceDesigned to be Universal for most gun stocks.

€499.00*